
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X45ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 45mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X45ST is a double-acting JIS compact cylinder engineered for space-constrained pneumatics. It yields 402.1 N of push force and 301.6 N of pull force at 0.5 MPa. The riveted C-clip body architecture significantly reduces axial footprint compared to round-body alternatives, making it highly effective for tight machine layouts.
This unit includes a built-in piston magnet compatible with AirTAC reed or electronic switches fitted into the body grooves. Deceleration relies on a fixed NBR elastomer bumper rather than an adjustable cushion, while the Ø16 mm rod utilizes a standard female M8x1.25 thread for direct load coupling. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X45ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides 402.1 N of extension force to secure aluminum housings inside CNC machining centers, fitting neatly into compact multi-pallet tombstones.
Drives the upper sealing jaws on continuous motion case sealers, using the 45 mm stroke to fold flaps without excessive axial body depth.
Actuates routing flaps on modular conveyor lines to sort packages by weight, relying on the integrated magnet for positional confirmation.
When sizing this 32 mm bore, stepping down to a 25 mm bore yields 245.4 N push, whereas stepping up to a 40 mm bore provides 628.3 N push at 0.5 MPa. Remember that a standard ACQ body will drift and lose position if air pressure drops, as the fixed bumper only absorbs end-stop impact; for fail-safe holding, specify an external rod lock or pilot-operated check valve. To order this exact unit, confirm the 32 mm bore, 45 mm stroke, NPT1/8 port, female M8x1.25 rod thread, and the required S magnet option.
Quick checklist
The 32 mm bore generates 402.1 N push and 301.6 N pull at 0.5 MPa, 562.9 N push at 0.7 MPa, and a maximum push of 82 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa with a speed range of 30-500 mm/s.
No, it uses a fixed NBR elastomer bumper at each end to absorb end-stop impact. It is not a field-adjustable cushion, so for high kinetic energy loads you should slow the approach or add an external shock absorber.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.