
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X45T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 45mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X45T is a double-acting JIS compact cylinder engineered to deliver 402.1 N of push force and 301.6 N of pull force at 0.5 MPa. Its C-clip and riveted piston-to-rod assembly drastically reduce overall axial length, saving valuable mounting depth in tight machinery footprints compared to traditional round-body units.
This 32 mm bore unit features a 16 mm piston rod and a NPT1/8 port. It relies on a fixed NBR elastomer bumper at each end to absorb end-stop impact rather than an adjustable air cushion. The body includes magnetic-switch grooves, though this specific SKU ships without the internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X45T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Actuates routing pop-up arms on a packaging conveyor belt, utilizing the 45 mm stroke to nudge cardboard cartons into secondary sorting lanes.
Presses small bronze bushings into aluminum housings on an automated assembly line, applying precise 402.1 N thrust at 0.5 MPa.
Operates a short-stroke inspection gate flap on a CNC machining cell, pushing parts into a quality control buffer zone.
If your application requires slightly less thrust, the 25 mm bore variant offers 245.4 N push at 0.5 MPa, while stepping up to the 40 mm bore provides 628.3 N for heavier loads. When ordering this ACQ32X45T, confirm the 45 mm stroke, NPT1/8 porting, female M8x1.25 rod-end thread, and the absence of a sensor magnet.
Remember that a standard double-acting cylinder drifts when air pressure is lost or the directional valve is centered; the fixed NBR bumper only decelerates the piston near stroke end and does not function as a locking brake. For fail-safe load holding, integrate an external rod lock or a pilot-operated check valve into your pneumatic circuit.
Quick checklist
The 32 mm bore provides 402.1 N push and 301.6 N pull at 0.5 MPa, 562.9 N push at 0.7 MPa, and a maximum push of 82 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa, runs at 30-500 mm/s, and functions in -20 to +70 C temperatures.
No, it uses fixed NBR elastomer bumpers at the stroke ends instead of an adjustable air cushion, so high-speed applications may need external shock absorbers. Additionally, while the body has sensor grooves, this specific model lacks the internal magnet required for reed or electronic switches.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.