
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X50LBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 50mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X50LBT is a double-acting JIS compact cylinder engineered to deliver 402.1 N of push force and 301.6 N of pull force at 0.5 MPa. Its C-clip and riveted piston-to-rod architecture drastically reduces axial footprint compared to traditional round-body units, saving valuable machine depth. This 32 mm bore model features a 16 mm piston rod and a NPT1/8 port.
Deceleration is handled by a fixed NBR elastomer bumper at each end, which is not a field-adjustable air cushion; for high kinetic energy loads, an external shock absorber or a slowed approach speed is recommended. This specific unit includes an LB mounting bracket and a female rod-end thread (M8x1.25). Although the body features magnetic-switch grooves, this configuration ships without a sensor magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X50LBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Secures aluminum engine blocks during CNC machining, utilizing the 402.1 N extend force to hold components firmly against locator pins without occupying excessive bay depth.
Drives mechanical arms to fold corrugated carton flaps on continuous packaging lines, where the fixed NBR bumper absorbs the repetitive end-stop impact within the 30-500 mm/s speed range.
Actuates routing gates on parcel conveyor systems, relying on the LB mounting bracket to stabilize the 16 mm rod under rapid lateral diverting cycles.
Selecting this 32 mm bore involves sizing against its neighbors: stepping down to a 25 mm bore yields 245.4 N push at 0.5 MPa, while stepping up to a 40 mm bore provides 628.3 N. Keep in mind that a standard ACQ body does not hold its position if air pressure drops or the valve is centered—the piston drifts, and the fixed bumper only decelerates near the stroke end, so a pilot-operated check valve or external rod lock is required for fail-safe load holding. To order, confirm the 50 mm stroke, NPT1/8 port, LB bracket, female M8x1.25 rod thread, and the absence of a magnet.
Quick checklist
This 32 mm bore double-acting cylinder generates 402.1 N push and 301.6 N pull at 0.5 MPa, 562.9 N push at 0.7 MPa, and a maximum push of 82 kgf at 1.0 MPa. It operates on filtered air at 0.15-1.0 MPa, with a proof pressure of 1.5 MPa, and a speed range of 30-500 mm/s.
No adjustable air cushion is featured; it relies on a fixed NBR elastomer bumper at each end. For position sensing, the body has grooves for AirTAC reed or electronic switches, but this specific SKU lacks the internal magnet, so a model with an -S suffix is needed for switch activation.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.