
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X50SBLBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 50mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X50SBLBT is a double-acting JIS compact cylinder engineered with a short C-clip and riveted piston-to-rod assembly. This thin profile significantly reduces axial mounting depth compared to conventional round-body units, yielding a smaller machine footprint. It generates 402.1 N of push force and 301.6 N of pull force at 0.5 MPa, utilizing a 16 mm piston rod.
This specific configuration includes an S magnet for position sensing via AirTAC reed or electronic switches seated in the body grooves, plus a B male-thread rod end (M14x1.5) for direct load coupling. The unit integrates an LB mounting bracket and relies on fixed NBR elastomer bumpers at stroke ends to absorb impact rather than an adjustable cushion. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X50SBLBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides 402.1 N of extend force at 0.5 MPa to secure mid-size aluminum or steel castings inside CNC machining centers using the male M14x1.5 thread.
Actuates a routing flap on a 30-500 mm/s packaging conveyor line, utilizing the LB bracket to pivot the diverter mechanism smoothly.
Functions as a physical stop gate for empty pallets on a gravity roller conveyor, using the integrated magnet to confirm gate closure.
When sizing this 32 mm bore, stepping down to a 25 mm bore yields 245.4 N push at 0.5 MPa, while stepping up to a 40 mm bore provides 628.3 N push at 0.5 MPa, giving you clear scaling options for your force requirements. Ensure your ordering essentials match this exact profile: 32 mm bore, 50 mm stroke, NPT1/8 port, built-in magnet, male M14x1.5 rod thread, and an LB bracket. Note that a standard ACQ body will drift and cannot hold a load if air pressure drops or the valve centers; an external rod lock or pilot-operated check valve is required for fail-safe position holding.
Quick checklist
This 32 mm bore cylinder delivers 402.1 N push and 301.6 N pull at 0.5 MPa, 562.9 N push at 0.7 MPa, and a maximum push of 82 kgf at 1.0 MPa.
No, it uses fixed NBR elastomer bumpers at each end to decelerate the piston. For high-speed or high-energy loads, slow the approach speed or install an external shock absorber.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.