
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X50SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 50mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X50SBT is a double-acting JIS compact cylinder engineered for space-constrained machinery, utilizing a riveted C-clip body design that drastically reduces axial footprint compared to standard round-body units. Operating at 0.5 MPa, it generates 402.1 N of push force and 301.6 N of pull force, making it well-suited for mid-range actuation tasks.
This specific configuration includes an integrated piston magnet (-S) for position sensing via AirTAC reed or electronic switches, and a male M14x1.5 threaded rod end (-B) for direct load coupling. Deceleration is handled by a fixed NBR elastomer bumper at each end, and the hard-anodized Ø32 mm bore accepts a NPT1/8 port. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X50SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Secures aluminum engine blocks during machining operations, utilizing the 402.1 N extend force to hold components firmly against locator pins without occupying excessive vertical bay space.
Drives mechanical arms to tuck corrugated cardboard flaps on high-speed packaging lines, where the 50 mm stroke and integrated magnet provide precise timing for automated sealing heads.
Actuates routing gates to redirect packaged goods on a distribution conveyor, relying on the male M14x1.5 rod end for a rigid linkage to the deflector plate.
When sizing this 32 mm bore actuator, verify if your application requires the 402.1 N push force at 0.5 MPa. If less power is needed, stepping down to the Ø25 bore yields 245.4 N of thrust, while stepping up to the Ø40 bore provides 628.3 N. Ensure your ordering essentials match this model: 32 mm bore, 50 mm stroke, NPT1/8 port, built-in magnet, and male M14x1.5 rod thread.
Keep in mind that a standard double-acting cylinder like this will drift if air pressure is lost or the control valve is centered. The fixed NBR bumper only decelerates the piston near the stroke ends and does not function as a locking brake. For fail-safe load holding, you must incorporate an external rod lock or a pilot-operated check valve into your pneumatic circuit.
Quick checklist
This 32 mm bore cylinder delivers 402.1 N push and 301.6 N pull at 0.5 MPa, and 562.9 N push at 0.7 MPa. The maximum push force is 82 kgf at 1.0 MPa. It operates within a pressure range of 0.15-1.0 MPa, handles speeds of 30-500 mm/s, and functions in temperatures from -20 to +70 C.
It uses a fixed NBR elastomer bumper at each end to absorb shock, which is not field-adjustable; for high-energy cycles, add an external shock absorber. The built-in magnet (-S) allows you to mount AirTAC reed or electronic switches directly into the body grooves for precise position detection.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.