
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X50ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 50mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X50ST is a double-acting JIS compact cylinder engineered for space-constrained pneumatics, delivering 402.1 N of push force and 301.6 N of pull force at 0.5 MPa. Its short C-clip and riveted body design significantly reduces axial mounting depth compared to standard round-body alternatives. Driven by a 16 mm piston rod, this unit is built for reliable linear actuation.
This 32 mm bore model includes a built-in piston magnet (-S) compatible with AirTAC reed or electronic switches, fitting neatly into the magnetic-switch grooves around the body. It features a NPT1/8 port and a female M8x1.25 rod-end thread. Deceleration is handled by a fixed NBR elastomer bumper at each end, which is not field-adjustable, so high-energy cycles may require slowing the approach or adding external shock absorption. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X50ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Actuates routing pop-up arms on packaging conveyors, utilizing the 402.1 N extend force to push cartons into secondary lanes at high speed.
Secures circuit boards during drilling or routing operations, where the 50 mm stroke provides ample travel for automated tooling access.
Ejects moulded plastic parts from small press dies, taking advantage of the short body profile to fit within tight machine footprints.
Selecting this 32 mm bore involves sizing against its neighbours: step down to the 25 mm bore for 245.4 N push at 0.5 MPa, or step up to the 40 mm bore for 628.3 N push at 0.5 MPa. This ACQ32X50ST configuration features a 50 mm stroke, a NPT1/8 port, a female rod-end thread, and the -S magnet option for position sensing. Keep in mind a plain compact cylinder drifts when air pressure is lost or a valve is centred, as the fixed bumper only decelerates the piston near stroke end rather than locking the load, so an external rod lock or pilot-operated check valve is required for fail-safe holding.
Quick checklist
At 0.5 MPa, this 32 mm bore cylinder provides 402.1 N push and 301.6 N pull force. At 0.7 MPa, the push force is 562.9 N. The maximum push force is 82 kgf at 1.0 MPa. It operates on filtered air between 0.15-1.0 MPa, with a speed range of 30-500 mm/s and a temperature range of -20 to +70 C.
No, the ACQ32X50ST uses a fixed NBR elastomer bumper at each end to absorb end-stop energy, which is not an adjustable air cushion. Additionally, it cannot hold a load if air pressure is lost, as the bumper only decelerates the piston near stroke end rather than acting as a brake. For position holding, an external rod lock is necessary.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.