
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X50T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 50mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X50T is a double-acting JIS compact cylinder engineered for space-constrained pneumatic setups. Utilizing a riveted piston-to-rod connection and C-clip assembly, the short body drastically reduces axial mounting depth compared to traditional round-body options. At 32 mm bore, it generates 402.1 N of push force and 301.6 N of pull force at 0.5 MPa.
This specific configuration features a 50 mm stroke and a 16 mm piston rod with a female M8x1.25 end thread. Deceleration is handled by fixed NBR elastomer bumpers at both ends rather than adjustable air cushions. The hard-anodized aluminum body includes magnetic-switch grooves, though this particular SKU ships without the internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X50T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the 402.1 N push stroke needed to fold and seal corrugated cardboard flaps on high-speed packaging lines without excessive axial footprint.
Actuates safety machine tool doors, utilizing the compact 50 mm stroke and NBR bumpers to achieve quiet, soft end-of-travel deceleration.
Drives electronic test probes into circuit boards, where the 16 mm rod and female M8x1.25 thread securely mount custom testing tooling plates.
When sizing this model, consider stepping down to a 25 mm bore for 245.4 N push at 0.5 MPa, or up to a 40 mm bore which yields 628.3 N push at 0.5 MPa. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.
Confirm your ordering essentials: 32 mm bore, 50 mm stroke, female rod end (M8x1.25), and no sensor magnet. Note that a standard ACQ will not hold a load if air pressure drops; the piston drifts and the fixed bumper only softens the end stop. For fail-safe positioning, integrate an external rod lock or pilot-operated check valve.
Quick checklist
At 0.5 MPa, this 32 mm bore cylinder provides 402.1 N push and 301.6 N pull. At 0.7 MPa, push increases to 562.9 N. The maximum push force is 82 kgf at 1.0 MPa. Operating pressure spans 0.15-1.0 MPa, with a speed range of 30-500 mm/s.
No, the ACQ32X50T uses fixed NBR elastomer bumpers at the stroke ends to absorb impact. It is not an adjustable air cushion. For high kinetic energy loads, you should slow the approach speed or install an external shock absorber.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.