
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X5BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 5mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X5BT is a double-acting JIS compact cylinder engineered for very short linear motion. It delivers 402.1 N of push force and 301.6 N of pull force at 0.5 MPa. The C-clip and riveted piston-to-rod assembly keeps the overall body extremely short, saving valuable axial mounting depth compared to standard round-body cylinders.
This specific configuration includes a male-thread piston rod end (M14x1.5) for direct mechanical coupling to your tooling. The Ø32 mm bore uses a NPT1/8 port and relies on fixed NBR elastomer bumpers at each end to absorb end-stop impact. Since this unit ships without a magnet, the integrated sensor grooves remain available but require adding a separate magnet for switch activation. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X5BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 5 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×5 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides high-frequency micro-clamping on a printed circuit board drill rig, utilizing the 5 mm stroke and 402.1 N force to secure panels without flexing the base.
Briefly deflects minor carton flaps during a continuous packaging line, where the short axial depth prevents interference with moving conveyor parts.
Ejects small stamped metal pins from a die set, using the male M14x1.5 thread to mount a custom brass tip that pushes parts into a catch bin.
For sizing context, stepping down to a 25 mm bore yields 245.4 N push at 0.5 MPa, while stepping up to a 40 mm bore provides 628.3 N push at 0.5 MPa. The 32 mm bore here offers a balanced middle ground for moderate clamping or lifting. When ordering, confirm the 5 mm stroke, NPT1/8 port, male M14x1.5 rod thread, and the absence of a sensor magnet.
Keep in mind that a standard compact cylinder does not hold its load if air pressure drops or the valve is centered; the piston will drift. The fixed NBR bumper only decelerates the rod near the stroke end and does not act as a lock. For fail-safe vertical holding, an external rod lock or pilot-operated check valve is required.
Quick checklist
This 32 mm bore double-acting cylinder provides 402.1 N push and 301.6 N pull at 0.5 MPa, 562.9 N push at 0.7 MPa, and a maximum push of 82 kgf at 1.0 MPa. It operates at 30-500 mm/s within a 0.15-1.0 MPa pressure range.
No. The ACQ32X5BT uses fixed NBR elastomer bumpers at each end rather than an adjustable air cushion. For high-speed impacts, you should slow the approach or add an external shock absorber. Additionally, it does not feature a pneumatic lock; if air is lost, the rod drifts, requiring an external rod lock for fail-safe holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.