
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X5SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 5mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X5SBT is a double-acting JIS compact cylinder engineered for tight axial spaces. A short C-clip and riveted piston-to-rod assembly shrinks the overall footprint compared to round-body alternatives, yielding 402.1 N of push force and 301.6 N of pull force at 0.5 MPa. The 32 mm bore features a hard-anodized inner wall and a fixed NBR elastomer bumper at each end to absorb end-stop impact.
This specific configuration includes a built-in piston magnet (-S) for triggering AirTAC reed or electronic switches via the body's peripheral grooves. It also features a male-thread piston rod end (-B) sized at M14x1.5, coupling directly to your tooling. The pneumatic supply connects via a NPT1/8 port, and the 5 mm stroke provides extremely short, high-force clamping action. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X5SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 5 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×5 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Secures printed circuit boards during routing or depaneling using the 5 mm stroke, providing 402.1 N of holding force without consuming valuable work area depth.
Drives the male M14x1.5 rod directly into vertical form-fill-seal packaging jaws, executing rapid 5 mm contact cycles with precise magnetic switch feedback.
Ejects small machined aluminum components from a CNC fixture, utilizing the fixed NBR bumper to silently absorb the 30-500 mm/s operational speed impacts.
When sizing this 32 mm bore, stepping down to a 25 mm bore yields 245.4 N push at 0.5 MPa, while stepping up to a 40 mm bore provides 628.3 N push at 0.5 MPa. This ACQ32X5SBT configuration is defined by its 32 mm bore, 5 mm stroke, NPT1/8 port, integrated sensor magnet, and male M14x1.5 rod thread. Note that a plain compact cylinder drifts when air pressure is lost or a valve centers; the fixed NBR bumper only decelerates the rod near the stroke end and does not lock the load. For fail-safe position holding, incorporate an external rod lock or a pilot-operated check valve.
Quick checklist
The 32 mm bore generates 402.1 N push and 301.6 N pull at 0.5 MPa, 562.9 N push at 0.7 MPa, and a maximum push of 82 kgf at 1.0 MPa. It uses a NPT1/8 port, operates at 30-500 mm/s, and carries a 16 mm rod with a male M14x1.5 thread.
No, the ACQ32X5SBT uses fixed NBR elastomer bumpers at the stroke ends rather than an adjustable air cushion. Additionally, it does not hold its position if air is lost; the rod will drift. An external shock absorber is recommended for high-energy cycles, and a rod lock is needed for fail-safe load holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.