
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X5SLBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 5mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X5SLBT is a double-acting JIS compact cylinder engineered for extremely short 5 mm strokes, utilizing a C-clip and riveted piston-to-rod assembly to minimize axial footprint. It delivers a robust 402.1 N push and 301.6 N pull at 0.5 MPa, making it highly effective for brief, high-force positioning tasks.
This configuration includes a built-in piston magnet (-S) compatible with AirTAC reed or electronic switches, alongside a male M14x1.5 threaded rod end (-B) for secure mechanical load coupling. The body features a hard-anodized 32 mm bore and relies on a fixed NBR elastomer bumper at each end to absorb end-stop impact rather than an adjustable air cushion. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X5SLBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 5 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×5 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides rapid 5 mm clamping of semiconductor lead frames during wire bonding, utilizing the 402.1 N extend force within a tight machine envelope.
Deploys a short male-threaded pin to push printed circuit boards out of routing conveyors, relying on the LB mount for rigid lateral stability.
Drives a short 5 mm indexing stroke on rotary pneumatic valves, using the integrated magnet to trigger solid-state switches for precise cycle counting.
When sizing this 32 mm bore actuator, consider stepping down to the 25 mm bore if your application requires less than 245.4 N of push force at 0.5 MPa, or moving up to the 40 mm bore which provides 628.3 N if greater thrust is necessary. Keep in mind that a plain compact cylinder drifts when air pressure is lost or the valve is centered, as the fixed bumper only decelerates the piston near stroke end; an external rod lock or pilot-operated check valve is required for fail-safe load holding.
To order this exact unit, confirm the 32 mm bore, 5 mm stroke, NPT1/8 port, LB mounting bracket, male M14x1.5 rod thread, and the integrated magnet for position sensing.
Quick checklist
This 32 mm bore double-acting cylinder generates 402.1 N push and 301.6 N pull at 0.5 MPa, extending to 562.9 N push at 0.7 MPa, with a maximum push capacity of 82 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa, runs at 30-500 mm/s, and functions in temperatures from -20 to +70 C.
No, it uses fixed NBR elastomer bumpers at both ends rather than field-adjustable air cushions, meaning external shock absorbers may be needed for high-energy loads. Additionally, the -B option specifies a male M14x1.5 threaded piston rod instead of the standard female M8x1.25 thread.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.