
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X60BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 60mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X60BT is a double-acting JIS compact cylinder engineered to deliver 402.1 N of push force and 301.6 N of pull force at 0.5 MPa. Its short C-clip and riveted body design drastically reduce axial mounting depth compared to round-body alternatives, freeing up valuable machine footprint space. The unit features a 16 mm piston rod and utilizes a NPT1/8 port.
This specific configuration includes the B option, providing a male M14x1.5 thread on the piston rod end for direct, secure coupling to your load. Deceleration at stroke ends is handled by a fixed NBR elastomer bumper rather than an adjustable air cushion, meaning external shock absorbers should be added for high-energy cycles. The body retains sensor grooves, though this model ships without the internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X60BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives a 60 mm diverting stroke on a packaging conveyor line, using the male M14x1.5 thread to securely attach a sweeping flap that redirects cartons.
Ejects small machined aluminum parts from a fixture, utilizing the 402.1 N push force to overcome friction without consuming excessive vertical space.
Actuates a 60 mm clamping gate on an automated assembly press, relying on the fixed NBR bumper to absorb the impact at the end of the stroke.
At 0.5 MPa, this 32 mm bore generates 402.1 N of push force. If you need slightly less force, the 25 mm bore offers 245.4 N; if your application requires more thrust, stepping up to the 40 mm bore yields 628.3 N. Remember that a plain ACQ cylinder does not hold its position or load when air is lost or the valve is centered, as the piston drifts and the fixed bumper only decelerates near the end of the stroke. For a fail-safe hold, an external rod lock or pilot-operated check valve is required. When ordering, confirm the 32 mm bore, 60 mm stroke, NPT1/8 port, no magnet, and the male M14x1.5 rod thread.
Quick checklist
This double-acting cylinder provides 402.1 N push and 301.6 N pull at 0.5 MPa, 562.9 N push at 0.7 MPa, and a maximum push of 82 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa, with a speed range of 30-500 mm/s.
It uses a fixed NBR elastomer bumper at each end to absorb the stop, which is not field-adjustable like an air cushion. The rod end features a male M14x1.5 thread for direct load coupling, and side load should be avoided to protect the compact rod.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.