
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X60SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 60mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X60SBT is a double-acting, single-rod JIS compact cylinder engineered to deliver 402.1 N of push force and 301.6 N of pull force at 0.5 MPa. Its short C-clip and riveted body design drastically reduces axial mounting depth compared to standard round-body units, making it highly effective for machines where space is strictly limited.
This specific configuration includes a built-in piston magnet (-S) for use with AirTAC reed or electronic switches, alongside a male-thread piston rod end (-B, M14x1.5) that couples directly to your tooling. The 32 mm bore features a hard-anodized inner wall, a NPT1/8 port, and relies on a fixed NBR elastomer bumper at each end to absorb end-stop impact. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X60SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives the rotary or reciprocating sealing jaw on continuous-motion packaging lines, utilizing the 60 mm stroke and male M14x1.5 rod for a rigid, direct tool mount.
Actuates a diverting flap on a sortation conveyor to push mixed SKUs onto secondary chutes with 402.1 N of extend force at 0.5 MPa.
Positions and locks sample carousels in analytical equipment where axial footprint is minimal, leveraging the compact body and magnetic position sensing.
When sizing your pneumatics, consider stepping down to the 25 mm bore (245.4 N push @0.5 MPa) for lighter loads, or up to the 40 mm bore (628.3 N push @0.5 MPa) if you need greater thrust. Keep in mind that a plain ACQ cylinder does not hold its position if air pressure drops or the valve is centered; the rod will drift, and the fixed NBR bumper only decelerates the piston near the stroke end. For a fail-safe hold, an external rod lock or pilot-operated check valve is required. To order this exact unit, confirm the 32 mm bore, 60 mm stroke, NPT1/8 port, male M14x1.5 rod thread, and the magnetic sensor option.
Quick checklist
This 32 mm bore cylinder provides 402.1 N push and 301.6 N pull at 0.5 MPa, 562.9 N push at 0.7 MPa, and a maximum push of 82 kgf at 1.0 MPa. The maximum standard stroke available for this bore is 100 mm.
No, the ACQ32X60SBT uses a fixed NBR elastomer bumper at each end to absorb impact, which is not field-adjustable. For high-speed or high-energy loads, you should slow the approach speed or add an external shock absorber.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.