
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X60ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 60mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X60ST is a double-acting JIS compact cylinder engineered for space-constrained pneumatics. It yields 402.1 N of push force and 301.6 N of pull force at 0.5 MPa. The integrated C-clip and riveted piston-to-rod assembly minimize overall axial length, saving valuable mounting depth where a conventional round-body unit will not fit.
This 32 mm bore variant incorporates a built-in piston magnet (-S) for position sensing via AirTAC reed or electronic switches seated in the body grooves. Deceleration relies on a fixed NBR elastomer bumper at each end rather than an adjustable air cushion, and the 16 mm rod uses a standard female M8x1.25 thread end. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X60ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives the sliding safety door on a CNC lathe, utilizing the 60 mm stroke and 402.1 N push force to move the heavy guard panel out of the work zone.
Deploys a mechanical arm to fold corrugated cardboard flaps prior to case sealing, where the compact C-clip body keeps the packaging line footprint narrow.
Pivots a routing gate along a conveyor belt to redirect pallets, relying on the built-in magnet to confirm gate position via a solid-state switch.
Stepping down yields 245.4 N push at 0.5 MPa from the Ø25 bore, while stepping up to the Ø40 bore provides 628.3 N push, letting you fine-tune force to the exact load. Keep in mind that a standard ACQ body lacks a physical lock; the rod will drift if air pressure drops or the valve centers, so deploy an external rod lock or pilot-operated check valve for fail-safe load holding.
When ordering, verify the 32 mm bore, 60 mm stroke, NPT1/8 port, female M8x1.25 rod thread, and the integrated magnet for sensor compatibility.
Quick checklist
At 0.5 MPa, the push force is 402.1 N and the pull force is 301.6 N. At 0.7 MPa, the push force reaches 562.9 N. The maximum push force is 82 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa, and the speed range is 30-500 mm/s.
It uses a fixed NBR elastomer bumper at each end to absorb shock, which is not an adjustable air cushion. For high kinetic energy, slow the approach or add an external shock absorber. It does not hold its load unpowered; the rod drifts when air is lost, requiring an external rod lock for fail-safe holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.