
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X60T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 60mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X60T is a double-acting JIS compact cylinder engineered for space-constrained pneumatic setups. It generates 402.1 N of push force and 301.6 N of pull force at 0.5 MPa, utilizing a 32 mm bore and a 60 mm stroke. The riveted C-clip body design drastically reduces axial footprint compared to traditional round-body units.
This specific model features a 16 mm piston rod with a female M8x1.25 thread end. Deceleration is handled by fixed NBR elastomer bumpers at both ends rather than adjustable air cushions, meaning external shock absorbers should be added for high-speed operations. The body includes magnetic-switch grooves, though this particular unit ships without the internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X60T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the 402.1 N push force needed to actuate routing gates on medium-speed parcel conveyor lines without occupying excessive frame depth.
Fits into tight mold bases to eject plastic parts, utilizing the 60 mm stroke and fixed NBR bumpers to safely absorb the end-of-travel impact.
Drives mechanical arms to fold major flaps on corrugated cartons, where the compact C-clip body saves valuable axial space on the sealing head.
When sizing this 32 mm bore model, consider stepping down to the 25 mm bore if your application requires less force (245.4 N push at 0.5 MPa), or moving up to the 40 mm bore for greater thrust (628.3 N push at 0.5 MPa). The 60 mm stroke falls well within the 100 mm standard limit for this bore family, with extended ranges available up to 300 mm for longer travels.
Keep in mind that a standard ACQ does not hold its position if air pressure drops or the valve is centered; the rod will drift, and the fixed bumper only decelerates near the end of the stroke. For fail-safe load holding, an external rod lock or pilot-operated check valve is required. To order, confirm the 32 mm bore, 60 mm stroke, NPT1/8 port, female rod thread, and no magnet configuration.
Quick checklist
This 32 mm bore cylinder provides 402.1 N push and 301.6 N pull at 0.5 MPa, 562.9 N push at 0.7 MPa, and a maximum push of 82 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa, with a speed range of 30-500 mm/s.
No, the ACQ32X60T uses fixed NBR elastomer bumpers at both ends to absorb end-stop shock. It is not an adjustable air cushion. For high-energy or high-speed cycles, you should slow the approach speed or install an external shock absorber.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.