
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X70SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 70mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X70SBT is a double-acting JIS compact cylinder engineered with a short C-clip and riveted body, significantly reducing axial mounting depth where a conventional round-body unit would not fit. Operating at 0.5 MPa, it generates 402.1 N of push force and 301.6 N of pull force, making it well-suited for mid-range automation tasks.
This specific configuration includes a built-in piston magnet (-S) for position sensing and a male-thread piston rod end (-B) sized at M14x1.5 for direct load coupling. Deceleration is handled by a fixed NBR elastomer bumper at each end rather than an adjustable air cushion, meaning external shock absorbers should be added for high-energy cycles. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X70SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 70 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives the folding mechanism on packaging lines, utilizing the 402.1 N push force to erect and seal cardboard cartons at cycle rates within the 30-500 mm/s range.
Actuates routing gates on conveyor systems to sort heavy pallets, taking advantage of the space-saving compact body and the rigid male M14x1.5 rod end.
Ejects stamped metal parts from small dies, where the fixed NBR bumper reliably absorbs the end-of-stroke impact without requiring external cushioning adjustments.
Stepping down, the Ø25 bore provides 245.4 N push at 0.5 MPa, while stepping up to the Ø40 bore yields 628.3 N push, helping you scale your force requirements accurately. Keep in mind that a standard ACQ body will drift and cannot hold a load if air pressure drops or the valve is centered; for fail-safe positioning, an external rod lock or pilot-operated check valve is required. To order this exact unit, confirm the 32mm bore, 70mm stroke, NPT1/8 port, S magnet, and male M14x1.5 rod thread.
Quick checklist
The ACQ32X70SBT provides 402.1 N push and 301.6 N pull at 0.5 MPa, 562.9 N push at 0.7 MPa, and a maximum push of 82 kgf at 1.0 MPa. The standard stroke limit for this 32mm bore is 100mm.
No, it uses a fixed NBR elastomer bumper at each end for deceleration, not an adjustable air cushion. Additionally, it does not hold its load if air is lost; the rod drifts, so an external rod lock is needed for fail-safe holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.