
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X70T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 70mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X70T is a double-acting JIS compact cylinder engineered for space-constrained automation. It generates 402.1 N of push force and 301.6 N of pull force at 0.5 MPa, utilizing a 32mm bore and 70mm stroke. The short C-clip and riveted piston-to-rod assembly drastically reduces overall axial length compared to standard round-body alternatives, saving valuable machine footprint depth.
This model features a 16mm piston rod with a female M8x1.25 thread end for direct load coupling. Deceleration at stroke ends is handled by a fixed NBR elastomer bumper rather than an adjustable air cushion, meaning high-energy cycles may require slowing the approach or adding an external shock absorber. The body includes grooves for magnetic switches, though this specific SKU ships without the internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X70T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 70 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives diverter arms on packaging conveyor lines where 402.1 N of push force reliably redirects medium-weight cardboard cartons at high cycle rates.
Extracts finished turned parts from CNC lathes, using the 70mm stroke to clear the work envelope quickly while minimizing Z-axis machine interference.
Ejects stamped metal blanks from progressive press dies, utilizing the fixed NBR bumper to absorb the sudden end-of-stroke impact without external plumbing.
Selecting the ACQ32X70T provides 402.1 N push at 0.5 MPa with a 70mm extension. If you need slightly less force, the next bore down is 25mm offering 245.4 N push; for heavier payloads, the 40mm bore yields 628.3 N push. When ordering, confirm the 32mm bore, 70mm stroke, NPT1/8 port, female M8x1.25 rod thread, and no magnet.
Note that a plain ACQ body does not hold its position if air pressure drops or the valve is centered, as the rod drifts and the fixed bumper only decelerates near the end of travel. For fail-safe load holding, an external rod lock or pilot-operated check valve is required.
Quick checklist
The ACQ32X70T delivers 402.1 N push and 301.6 N pull at 0.5 MPa, 562.9 N push at 0.7 MPa, and a maximum push of 82 kgf at 1.0 MPa. The operational speed range is 30-500 mm/s.
It uses a fixed NBR elastomer bumper at each end to absorb shocks, which is not an adjustable air cushion. Furthermore, it does not hold its load if air is lost; an external rod lock or check valve is needed for fail-safe holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.