
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X75BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 75mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X75BT is a double-acting JIS compact cylinder engineered to deliver 402.1 N of push force and 301.6 N of pull force at 0.5 MPa. Its short C-clip and riveted body design drastically reduces axial mounting depth compared to traditional round-body units, making it highly effective for machinery where space is strictly limited. The bore is hard-anodized for durability, operating smoothly at speeds between 30 and 500 mm/s.
This specific configuration includes a male-thread piston rod end (M14x1.5) for direct, secure coupling to your tooling. Instead of an adjustable air cushion, it relies on a fixed NBR elastomer bumper at each end to absorb end-stop impact; for high-energy cycles, consider slowing the approach or adding an external shock absorber. The body features integrated magnetic-switch grooves, though this particular SKU ships without the internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X75BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Actuates routing gates on packaging lines where the 402.1 N extend force easily pushes cartons onto auxiliary chutes without demanding excessive mounting footprint.
Drives small tooling trays in automated machining centers, utilizing the 75 mm stroke to shuttle cutting tools into position for quick-change operations.
Positions electronic component trays in pick-and-place machinery, taking advantage of the short body length to minimize the overall width of the handling module.
Selecting this 32 mm bore with a 75 mm stroke provides a middle-ground solution within the compact family. If you need slightly less force, the 25 mm bore offers 245.4 N of push at 0.5 MPa, whereas stepping up to a 40 mm bore yields 628.3 N. Keep in mind that a standard ACQ body does not hold its load if air pressure drops or the valve is centered—the piston will drift, as the fixed bumper only decelerates near the stroke end. For fail-safe positioning, an external rod lock or pilot-operated check valve is required.
When requesting a quote, confirm the essential ordering parameters: a 32 mm bore, 75 mm stroke, NPT1/8 port, male M14x1.5 rod thread (B option), and no sensor magnet. This model is fully compatible with standard AirTAC compact-cylinder accessories like FA, FB, CB, and LB brackets.
Quick checklist
This 32 mm bore cylinder generates 402.1 N push and 301.6 N pull at 0.5 MPa, and 562.9 N push at 0.7 MPa. The maximum push force is 82 kgf at 1.0 MPa. It operates on filtered air between 0.15 and 1.0 MPa, with a proof pressure of 1.5 MPa, and supports speeds of 30-500 mm/s.
The body includes grooves for AirTAC reed or electronic switches, but this specific SKU ships without the internal magnet, so position sensing is not possible out of the box. For load coupling, the B option designates a male-thread piston rod end measuring M14x1.5 for direct mechanical attachment.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.