
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X75SBCBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 75mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X75SBCBT is a double-acting JIS compact cylinder engineered for space-constrained machinery, utilizing a short C-clip and riveted body to drastically reduce axial mounting depth compared to round-body alternatives. It yields 402.1 N of push force and 301.6 N of pull force at 0.5 MPa, operating with a 16 mm piston rod and a NPT1/8 port.
This specific configuration includes a built-in piston magnet (-S) compatible with AirTAC reed or electronic switches for precise position sensing along the body grooves. It features a male-thread rod end (-B, M14x1.5) for direct load coupling, and comes equipped with a CB mounting bracket. Deceleration relies on fixed NBR elastomer bumpers at both ends rather than adjustable air cushions, making it optimal for standard cycling speeds up to 500 mm/s. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X75SBCBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides 402.1 N of extension force at 0.5 MPa to secure aluminum castings onto a CNC machining center vise, utilizing the male M14x1.5 thread for a direct custom jaw interface.
Actuates a 75 mm stroke diverter gate on a packaging conveyor, using the integrated magnet with an electronic switch to confirm gate position before the belt restarts.
Pushes bronze bushings into motor housings on an automated assembly line, where the compact C-clip body minimizes frame width and the CB bracket secures the actuator to the machine sub-plate.
When sizing this 32 mm bore actuator, evaluate your thrust requirements against neighboring options: stepping down to a 25 mm bore yields 245.4 N push at 0.5 MPa, while stepping up to a 40 mm bore provides 628.3 N push at 0.5 MPa. Ensure your application requires the 75 mm stroke, a NPT1/8 port, and the specified 16 mm rod diameter.
Because this is a double-acting cylinder, the piston will drift and fail to hold a load if air pressure is lost or the directional valve is centered. The fixed NBR bumpers only decelerate the rod near the stroke endpoints; they do not function as a locking mechanism. For fail-safe vertical or heavy load holding, incorporate an external rod lock or a pilot-operated check valve. Confirm your ordering essentials: 32 mm bore, 75 mm stroke, S magnet, B male rod thread, and CB bracket.
Quick checklist
This 32 mm bore double-acting cylinder generates 402.1 N push and 301.6 N pull at 0.5 MPa, 562.9 N push at 0.7 MPa, and a maximum push of 82 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa with a speed range of 30-500 mm/s.
No, the ACQ32X75SBCBT uses fixed NBR elastomer bumpers at the stroke ends to absorb shock. These are not field-adjustable. For high kinetic energy loads, you should slow the approach speed or install an external shock absorber.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.