
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X75SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 75mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X75SBT is a double-acting JIS compact cylinder engineered for space-constrained pneumatic setups. Utilizing a short C-clip and riveted piston-to-rod body design, it saves substantial axial mounting depth compared to traditional round-body units. At 32mm bore, it generates 402.1 N push and 301.6 N pull force at 0.5 MPa.
This specific configuration includes an integrated piston magnet (-S) for use with AirTAC reed or electronic solid-state switches, fitting directly into the body's magnetic grooves. The -B option provides a male M14x1.5 threaded rod end for direct load coupling. Deceleration relies on a fixed NBR elastomer bumper at each end stop, not an adjustable air cushion. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X75SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives the folding arms on a continuous-motion carton erector, utilizing the 75mm stroke and 402.1 N push force to open and square corrugated board flaps before sealing.
Powers a diverter gate on a modular conveyor belt line, using the male M14x1.5 rod end to directly push lightweight aluminum routing guides into the product flow path.
Positions sample trays inside automated laboratory diagnostics equipment, where the compact C-clip body minimizes frame intrusion and the magnetic sensor tracks exact 75mm displacement.
When sizing this 32mm bore model, consider stepping down to the 25mm bore (245.4 N push at 0.5 MPa) for lighter duties, or up to the 40mm bore (628.3 N push at 0.5 MPa) if your application requires greater thrust. Remember that a plain ACQ cylinder does not hold its position or load when air is lost or the valve is centered; the rod will drift. For fail-safe load holding, an external rod lock or pilot-operated check valve is required.
To order this exact unit, confirm the essentials: 32mm bore, 75mm stroke, NPT1/8 port, the -S piston magnet for position sensing, and the -B male M14x1.5 rod thread. Operating speed spans 30-500 mm/s.
Quick checklist
The 32mm bore yields 402.1 N push and 301.6 N pull at 0.5 MPa, 562.9 N push at 0.7 MPa, and a maximum push of 82 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa with a proof pressure of 1.5 MPa.
It uses a fixed NBR elastomer bumper at each end to absorb the stop energy; it is not an adjustable air cushion or a locking brake. For high-speed cycling, slow the approach or add an external shock absorber. Position sensing requires the built-in -S magnet paired with an AirTAC reed or electronic switch.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.