
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X75ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 75mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X75ST is a double-acting JIS compact cylinder engineered for space-constrained pneumatics. It generates 402.1 N of push force and 301.6 N of pull force at 0.5 MPa, utilizing a 32 mm bore and 75 mm stroke. The integrated C-clip and riveted piston-to-rod design drastically reduces overall axial length compared to standard round-body units, saving valuable machine footprint.
This variant includes a built-in piston magnet (-S) for position sensing via AirTAC reed or electronic switches mounted in the body grooves. Deceleration relies on a fixed NBR elastomer bumper at each end rather than an adjustable air cushion, meaning external shock absorbers should be added for high-energy cycles. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X75ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the 402.1 N extension force needed to actuate routing gates on medium-speed parcel conveyor lines, fitting neatly into tight transfer zones.
Deploys its 75 mm travel to push finished plastic parts out of small injection moulding tools, where the short body length minimizes interference with the mould half.
Delivers reliable stroke sequencing to fold minor flaps on corrugated cartons prior to case sealing, operating efficiently at speeds between 30 and 500 mm/s.
When sizing this 32 mm bore model, stepping down to a 25 mm bore reduces the 0.5 MPa push force to 245.4 N, while stepping up to a 40 mm bore increases it to 628.3 N, allowing you to scale thrust precisely to your load. Note that a standard ACQ will drift and cannot hold a load if air pressure drops or the valve is centered; an external rod lock or pilot-operated check valve is required for fail-safe position holding. To order, confirm the 32 mm bore, 75 mm stroke, NPT1/8 port, female rod thread, and the required magnetic sensor option.
Quick checklist
At 0.5 MPa, this 32 mm bore cylinder provides 402.1 N of push force and 301.6 N of pull force. At 0.7 MPa, the push force is 562.9 N, with a maximum push capacity of 82 kgf at 1.0 MPa. It operates on filtered air between 0.15 and 1.0 MPa, with a speed range of 30-500 mm/s.
No, the ACQ series uses a fixed NBR elastomer bumper at the stroke ends to absorb impact. It is not a field-adjustable air cushion. If your application runs at high speeds or involves heavy moving masses, you should slow the approach speed or install an external shock absorber to prevent damage.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.