
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X80BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 80mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X80BT is a double-acting JIS compact air cylinder engineered with a short C-clip and riveted piston-to-rod body, drastically reducing axial mounting depth compared to conventional round-body units. Operating at 0.5 MPa, it generates 402.1 N of push force and 301.6 N of pull force, scaling to a maximum push of 82 kgf at 1.0 MPa.
This specific configuration includes a male-thread M14x1.5 piston rod end for direct, secure load coupling, alongside a NPT1/8 port. The unit relies on a fixed NBR elastomer bumper at each end stop to absorb impact energy rather than an adjustable air cushion. Furthermore, while the body features integrated magnetic-switch grooves, this particular SKU ships without a piston magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X80BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Actuates a routing flap on a logistics conveyor belt, utilizing the 402.1 N push force at 0.5 MPa to smoothly redirect medium-weight parcels.
Opens and closes a sliding safety guard on a CNC turning center, where the short compact body saves valuable axial machine envelope space.
Drives a pneumatic folding blade on an end-of-line carton sealing machine, using the male M14x1.5 rod end for rigid mechanical attachment.
When sizing your actuator, note that stepping down to a 25 mm bore reduces the 0.5 MPa push force to 245.4 N, whereas stepping up to a 40 mm bore increases it to 628.3 N. The 80 mm stroke on this 32 mm bore unit falls within the standard range, which extends to 100 mm, with extended lengths available up to 300 mm for long-stroke needs.
Keep in mind that a standard ACQ body will drift and cannot hold a load if air pressure drops or the directional valve centers; the fixed NBR bumper only decelerates the piston near stroke end and does not function as a locking brake. To confirm your ordering essentials: specify the 32 mm bore, 80 mm stroke, NPT1/8 port, male M14x1.5 rod thread (B), and no magnet.
Quick checklist
At 0.5 MPa, the push force is 402.1 N and the pull force is 301.6 N. At 0.7 MPa, the push force is 562.9 N. The maximum push force is 82 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa, speed range is 30-500 mm/s, and the rod diameter is 16 mm.
No. It uses a fixed NBR elastomer bumper at each end to absorb end-stop shock, which is not field-adjustable, so you may need an external shock absorber for high-energy loads. Additionally, while the body has sensor grooves, this specific model does not include a piston magnet for reed or electronic switches.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.