
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X80SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 80mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X80SBT is a double-acting JIS compact cylinder engineered around a short C-clip and riveted body architecture, which conserves axial mounting depth where a standard round-body unit cannot fit. Operating at an 80mm stroke, it generates 402.1N of push force and 301.6N of pull force at 0.5 MPa.
This specific configuration includes a built-in piston magnet (-S) for position sensing and a male M14x1.5 threaded rod end (-B) for direct load coupling. Deceleration at the stroke extremes relies on a fixed NBR elastomer bumper rather than an adjustable air cushion, and the hard-anodized bore ensures sustained mechanical longevity. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X80SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives a routing flap on a logistics conveyor belt, using the 80mm stroke to push parcels into secondary sorting lanes efficiently.
Secures aluminum engine blocks during machining, leveraging the 402.1N push force to hold the workpiece against the cutting tool.
Folds the minor flaps on automated case erecting lines, where the compact body depth prevents interference with adjacent folding mechanisms.
When sizing this 32mm bore unit, consider stepping down to the 25mm bore (providing 245.4N push at 0.5 MPa) for lighter duties, or moving up to the 40mm bore (yielding 628.3N push at 0.5 MPa) for heavier thrust requirements. Remember that a standard ACQ body will not hold a load if air pressure drops or the valve centers; the rod drifts until the bumper makes contact. For fail-safe positioning, integrate an external rod lock or a pilot-operated check valve. To order this exact unit, confirm the 32mm bore, 80mm stroke, NPT1/8 port, male M14x1.5 rod thread, and the required magnetic sensor option.
Quick checklist
This 32mm bore double-acting cylinder provides 402.1N push and 301.6N pull at 0.5 MPa, 562.9N push at 0.7 MPa, and a maximum push of 82 kgf at 1.0 MPa. It operates at pressures from 0.15-1.0 MPa with a speed range of 30-500 mm/s.
No, it uses fixed NBR elastomer bumpers at each end stop, not field-adjustable air cushions; add external shock absorbers for high-energy impacts. Additionally, the -B code signifies a male M14x1.5 threaded piston rod end for direct mounting.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.