
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X80ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 80mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X80ST is a double-acting JIS compact cylinder engineered with a short C-clip and riveted piston-to-rod body. This design minimizes axial mounting depth compared to traditional round-body units, making it highly effective for machinery where space is constrained. It provides a push force of 402.1 N and a pull force of 301.6 N at 0.5 MPa.
This 32mm bore unit integrates an internal piston magnet compatible with AirTAC reed or electronic switches for precise position sensing. It relies on a fixed NBR elastomer bumper at each end to absorb end-stop energy rather than an adjustable air cushion. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X80ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Actuates routing gates on high-speed packaging conveyors to sort boxes, utilizing the 80mm stroke to fully clear the product path during transit.
Pushes raw bar material into the lathe spindle, where the compact footprint saves axial space and the integrated magnet confirms material loading.
Secures circuit boards during drilling and routing operations, applying 402.1 N of clamping force without distorting the delicate substrate.
When sizing this model, stepping down to a 25mm bore yields 245.4 N of push force at 0.5 MPa, while stepping up to a 40mm bore provides 628.3 N. The ACQ32X80ST configuration specifies a 32mm bore, 80mm stroke, a female M8x1.25 rod end, and the S magnet option for switch sensing. Keep in mind that a standard ACQ cylinder does not hold its load if air pressure is lost or the valve is centered; the piston will drift. For fail-safe position holding, an external rod lock or pilot-operated check valve is required.
Quick checklist
At 0.5 MPa, the push (extend) force is 402.1 N and the pull (retract) force is 301.6 N. At 0.7 MPa, the push force is 562.9 N. The maximum push force is 82 kgf at 1.0 MPa.
No, the ACQ32X80ST uses a fixed NBR elastomer bumper at each end to absorb end-stop shock. It is not a field-adjustable air cushion, so for high-speed or high-energy loads, you should slow the approach or add an external shock absorber.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.