
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X80T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 80mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X80T is a double-acting JIS compact cylinder featuring a 32mm bore and an 80mm stroke. It delivers 402.1 N of push force and 301.6 N of pull force at 0.5 MPa, making it a robust choice for mid-range actuation. The short C-clip and riveted piston-to-rod assembly drastically reduce overall axial length compared to round-body alternatives, saving valuable machine footprint.
This model uses a 16mm piston rod with a female M8x1.25 end thread. Deceleration at the stroke extremes relies on a fixed NBR elastomer bumper rather than an adjustable air cushion, so high-energy cycles may need external shock absorption. The body includes magnetic-switch grooves, though this specific unit ships without the internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X80T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the 402.1 N push force required to fold and secure heavy cardboard flaps on continuous-motion carton erectors.
Actuates lateral diverter arms on conveyor lines to route medium-weight pallets into packing lanes without stalling.
Ejects stamped metal parts from small die sets using its 80mm stroke, relying on the fixed NBR bumper to soften the stop.
If you are sizing this 32mm bore, stepping down to the 25mm bore yields 245.4 N push at 0.5 MPa, while stepping up to the 40mm bore provides 628.3 N. Remember that a plain ACQ cylinder does not hold its load if air pressure drops or the valve centers; the rod will drift, and the fixed NBR bumper only decelerates it near the end of travel. For fail-safe holding, an external rod lock or pilot-operated check valve is required.
To order this exact unit, confirm the 32mm bore, 80mm stroke, NPT1/8 port, and the default female M8x1.25 rod end thread. This configuration omits the sensor magnet, operating within the standard 100mm stroke limit for this bore size.
Quick checklist
At 0.5 MPa, the ACQ32X80T provides 402.1 N of push (extend) force and 301.6 N of pull (retract) force. At 0.7 MPa, the push force is 562.9 N. The maximum push force is 82 kgf at 1.0 MPa.
No, the ACQ32X80T uses a fixed NBR elastomer bumper at each end to absorb end-stop impact. It is not a field-adjustable air cushion, so for high-speed or high-energy loads, you should add an external shock absorber or slow the approach speed.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.