
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X90BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 90mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X90BT is a double-acting, single-rod JIS compact cylinder engineered to deliver 402.1 N of push force and 301.6 N of pull force at 0.5 MPa. Its C-clip and riveted piston-to-rod assembly drastically reduces overall axial length compared to conventional round-body units, making it ideal for machinery where mounting depth is restricted. The 32 mm bore features a hard-anodized inner wall and a NPT1/8 port.
This specific configuration includes a male M14x1.5 threaded piston rod end (designated by the B option) for direct mechanical coupling to your load. Instead of an adjustable air cushion, the cylinder relies on a fixed NBR elastomer bumper at each end to absorb end-stop impact. The body retains magnetic-switch grooves, though this particular SKU ships without the internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X90BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 90 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives diverter mechanisms on packaging lines where the 402.1 N push force easily redirects cartons, while the short C-clip body fits within tight conveyor side-frame clearances.
Secures aluminum workpieces inside machining centers using the male M14x1.5 rod end, providing reliable hold against vibration without occupying excessive Z-axis tooling space.
Raises and lowers lightweight access gates on automated machinery; the 90 mm stroke provides adequate travel, though an external shock absorber is recommended for high-speed vertical descents.
Selecting this 32 mm bore model provides a substantial step up from the 25 mm version (245.4 N push @0.5 MPa), yet remains more compact than the larger 40 mm bore (628.3 N push @0.5 MPa). Operating at 30-500 mm/s, the 90 mm stroke sits just below the 100 mm maximum standard stroke limit for this bore size, avoiding the surcharges or lead times associated with the made-to-order long-stroke range. When ordering, confirm the 32 mm bore, 90 mm stroke, NPT1/8 port, male M14x1.5 rod thread, and the absence of a sensor magnet.
Because this is a standard double-acting cylinder, it will not hold its position if air pressure drops or the directional valve is centered—the piston will drift. The fixed NBR bumper only decelerates the piston near the stroke endpoints and does not function as a locking brake. If your application requires fail-safe load holding, you must integrate an external rod lock or a pilot-operated check valve into your pneumatic circuit.
Quick checklist
The 32 mm bore generates 402.1 N push and 301.6 N pull at 0.5 MPa, increasing to 562.9 N push at 0.7 MPa, with a maximum push capacity of 82 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa, handles speeds of 30-500 mm/s, and functions in temperatures from -20 to +70 C.
No, it uses fixed NBR elastomer bumpers at both ends rather than a field-adjustable air cushion, so high-energy cycles may require external shock absorption. Additionally, while the body features switch grooves, this specific SKU lacks the internal magnet, meaning it cannot be used with reed or electronic switches without modification.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.