
The AirTAC ACQ Ultra Thin Air Cylinder ACQ32X90T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø32mm bore and 90mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ32X90T is a double-acting JIS compact cylinder engineered to deliver 402.1 N of push force and 301.6 N of pull force at 0.5 MPa. Its short C-clip and riveted piston-to-rod assembly drastically reduce overall axial length compared to round-body alternatives, saving valuable machine footprint depth. This 32 mm bore unit features a 16 mm piston rod, a NPT1/8 port, and a default female M8x1.25 rod-end thread for straightforward load coupling.
Instead of an adjustable air cushion, this model relies on fixed NBR elastomer bumpers at both ends to absorb end-stop impact. The barrel inner wall is hard-anodized for wear resistance, and the body includes integrated magnetic-switch grooves. Since this specific configuration ships without the internal magnet, adding an AirTAC reed or electronic switch requires a model with the -S option. Operating speed spans 30-500 mm/s across a 0.15-1.0 MPa pressure range. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ32X90T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø32 mm |
| Stroke | 90 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 302 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Folds and holds cardboard side flaps on packaging lines using 402.1 N of push force at 0.5 MPa within a tight machine frame.
Actuates routing gates on conveyor systems where the 90 mm stroke and compact 32 mm body depth prevent interference with passing goods.
Drives a metering pump for liquid reagents, utilizing the 301.6 N retract force and 30-500 mm/s speed range for precise fluid handling.
When sizing this 90 mm stroke unit, consider stepping to the Ø25 bore if your application requires less force (245.4 N push at 0.5 MPa), or move up to the Ø40 bore for greater thrust (628.3 N push at 0.5 MPa). Remember that a plain ACQ cylinder does not hold its load if air pressure is lost or the valve is centered; the rod will drift, and the fixed NBR bumper only decelerates near the stroke end. For fail-safe positioning, an external rod lock or pilot-operated check valve is required. To order, confirm the 32 mm bore, 90 mm stroke, NPT1/8 port, female M8x1.25 rod thread, and no magnet.
Quick checklist
The ACQ32X90T generates 402.1 N push and 301.6 N pull at 0.5 MPa, 562.9 N push at 0.7 MPa, with a maximum push capacity of 82 kgf at 1.0 MPa. The operating pressure is 0.15-1.0 MPa and the speed range is 30-500 mm/s.
No, it uses fixed NBR elastomer bumpers at each end, which are not field-adjustable. If your cycle has high kinetic energy, add an external shock absorber or slow the approach. Additionally, it does not hold position when air is lost; the rod drifts, requiring an external rod lock for fail-safe holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.