
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X100BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 100mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X100BT is a double-acting JIS compact cylinder engineered for space-constrained machinery, delivering a robust 628.3 N push force at 0.5 MPa. Its short C-clip and riveted piston-to-rod assembly drastically reduces axial footprint compared to conventional round-body units. This specific configuration includes a male M14x1.5 piston rod end, coupling directly to tooling without extra adapters.
At the maximum standard stroke of 100 mm for this bore size, the unit relies on a fixed NBR elastomer bumper at each end to absorb end-stop impact. This is not an adjustable air cushion, so high kinetic energy applications require slowing the approach or adding external shock absorbers. The hard-anodized aluminum bore operates between 0.15 and 1.0 MPa at speeds of 30-500 mm/s. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X100BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives diverting pushers on packaging lines, utilizing the 100 mm stroke to redirect cartons between sorting lanes with 628.3 N of extend force.
Secures aluminum housings inside machining centers via the male M14x1.5 rod end, providing reliable holding without consuming excessive Z-axis depth.
Acts as a pneumatic stop pin on vertical pallet lifts, relying on the compact profile to fit within tight conveyor frame gaps.
Choosing this 40 mm bore provides 628.3 N of extension thrust at 0.5 MPa. If your payload is lighter, stepping down to the 32 mm bore yields 402.1 N and saves valuable mounting space; conversely, moving up to the 50 mm bore offers 981.8 N for heavier loads. Remember that a plain double-acting cylinder drifts when air pressure is lost or the valve is centered, as the fixed bumper only decelerates near stroke end and acts as neither a lock nor a brake. For fail-safe positioning, an external rod lock or pilot-operated check valve is required.
When ordering, verify your essential parameters: this ACQ40X100BT features a 40 mm bore, 100 mm stroke, NPT1/8 porting, a male M14x1.5 rod thread (indicated by the B suffix), and ships without a sensor magnet. The body retains magnetic-switch grooves for future automation upgrades if you later specify an S-suffix model.
Quick checklist
At 0.5 MPa, this 40 mm bore cylinder generates 628.3 N of push force and 527.8 N of pull force. At 0.7 MPa, the push force increases to 879.6 N, with a maximum push capacity of 128 kgf at 1.0 MPa. It operates within a pressure range of 0.15-1.0 MPa and travels at speeds between 30-500 mm/s.
No, it uses fixed NBR elastomer bumpers at the stroke ends rather than an adjustable air cushion, so external shock absorbers may be needed for high-energy loads. Additionally, this specific SKU lacks a built-in magnet, though the body features grooves ready to accept AirTAC reed or electronic switches if you upgrade to an S-suffix model later.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.