
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X100SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 100mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X100SBT is a double-acting JIS compact cylinder engineered for a 40mm bore and 100mm stroke. It yields 628.3 N of push force and 527.8 N of pull force at 0.5 MPa. The short C-clip and riveted body design drastically cuts axial mounting depth compared to round-body units, saving valuable machine footprint.
This specific configuration includes a built-in piston magnet (-S) for position sensing and a male-thread rod end (-B). The 16mm rod terminates in an M14x1.5 male thread for direct load coupling. Deceleration relies on fixed NBR elastomer bumpers at both ends rather than adjustable cushions, so high-speed cycles may require external shock absorption. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X100SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives diverting arms on packaging conveyor lines where the 100mm stroke shifts goods between lanes using 628.3 N of thrust.
Actuates tool release mechanisms on machining centers, utilizing the M14x1.5 male rod thread for a rigid coupling to the tool carousel.
Folds and seals corrugated carton blanks, benefiting from the short body length to keep the forming head footprint minimal.
At 0.5 MPa, this 40mm bore generates 628.3 N of thrust. If your application requires less force, step down to the 32mm bore offering 402.1 N; if you need more power, step up to the 50mm bore providing 981.8 N. Remember that a standard ACQ body drifts when air pressure is lost or a valve is centered, as the fixed bumper only softens the end stop without locking the load. To maintain position safely during failures, integrate an external rod lock or a pilot-operated check valve. When ordering, verify the 40mm bore, 100mm stroke, NPT1/8 port, required S magnet, and M14x1.5 male B thread.
Quick checklist
This 40mm bore double-acting cylinder provides 628.3 N push and 527.8 N pull at 0.5 MPa, 879.6 N push at 0.7 MPa, and a maximum push of 128 kgf at 1.0 MPa. It operates within a pressure range of 0.15-1.0 MPa at speeds between 30-500 mm/s.
Cushioning is provided by fixed NBR elastomer bumpers at the stroke ends and cannot be adjusted; for high-energy impacts, slow the approach or add external shock absorbers. The S option adds a piston magnet compatible with AirTAC reed or electronic switches fitted into the body grooves.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.