
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X100SCBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 100mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X100SCBT is a double-acting, single-rod JIS compact cylinder engineered for space-constrained setups. A short C-clip and riveted piston-to-rod assembly minimizes axial length, saving valuable machine footprint depth compared to standard round-body units. At 40mm bore, it generates 628.3 N of push force and 527.8 N of pull force at 0.5 MPa.
This specific configuration includes a built-in piston magnet (-S) for position sensing, a male-thread rod end (M14x1.5), and a CB mounting bracket. The hard-anodized bore wall reduces friction, while fixed NBR elastomer bumpers absorb end-stop impact. Note that it lacks an adjustable air cushion, so high-energy cycles may require external shock absorption. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X100SCBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Handles product routing on a 40mm bore conveyor diverter gate, utilizing the 100mm stroke to shift containers between packaging lanes smoothly.
Operates a vertical sliding safety door on a CNC lathe, where the compact body depth saves axial space and the male M14x1.5 rod threads directly into the door bracket.
Drives the upper sealing jaw mechanism on an automated carton sealer, delivering 628.3 N of push force to secure adhesive application.
Selecting this 40mm bore model provides 628.3 N push at 0.5 MPa. If your application requires less force, stepping down to the 32mm bore yields 402.1 N. Conversely, scaling up to the 50mm bore provides 981.8 N. This cylinder reaches its maximum standard stroke of 100mm, and longer strokes up to 300mm are available in the long-stroke range.
Remember that a plain ACQ-type cylinder does not hold its load if air pressure is lost or the valve is centred; the rod drifts and the fixed bumper only decelerates near the stroke end. For fail-safe position holding, specify an external rod lock or pilot-operated check valve. To order, confirm the 40mm bore, 100mm stroke, NPT1/8 port, male M14x1.5 rod thread, magnet, and CB mount.
Quick checklist
This 40mm bore double-acting cylinder provides 628.3 N push and 527.8 N pull at 0.5 MPa, 879.6 N push at 0.7 MPa, and a maximum push of 128 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa, proof pressure is 1.5 MPa, and the speed range is 30-500 mm/s.
Cushioning is provided by fixed NBR elastomer bumpers at each end, not an adjustable air cushion. For high-speed or high-energy loads, slow the approach or add an external shock absorber. The built-in magnet (-S) works with AirTAC reed or electronic solid-state switches mounted in the body grooves.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.