
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X100SLBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 100mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X100SLBT is a double-acting JIS compact cylinder engineered with a short C-clip and riveted body to drastically reduce axial mounting depth compared to round-body units. Operating at 0.5 MPa, it generates 628.3 N of push force and 527.8 N of pull force, peaking at 128 kgf maximum push at 1.0 MPa.
This configuration includes a built-in piston magnet (-S) compatible with AirTAC reed or electronic switches via body grooves, and an LB mounting bracket. Deceleration relies on a fixed NBR elastomer bumper at each end, which is not an adjustable air cushion, so high-energy cycles may require external shock absorption. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X100SLBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the 628.3 N push stroke required to mechanically fold heavy corrugated cardboard flaps on high-speed packaging lines before tape sealing.
Uses the 100mm stroke and LB bracket mount to swing a diverting guide arm, redirecting heavy pallets between adjacent conveyor tracks.
Delivers consistent 527.8 N retraction force to extract small metal stampings from progressive press dies within a tight machine footprint.
Stepping down, the Ø32 bore provides 402.1 N push at 0.5 MPa, while stepping up to the Ø50 bore yields 981.8 N, letting you fine-tune the exact force class for your payload. Remember that a plain ACQ-type does not hold its load if air pressure drops or the valve centers; the rod drifts and the fixed NBR bumper only decelerates near the stroke end, so add an external rod lock or pilot-operated check valve for fail-safe positioning. To order this exact unit, confirm the 40mm bore, 100mm stroke, NPT1/8 port, -S magnet, female M8x1.25 rod thread, and LB bracket interface.
Quick checklist
This 40mm bore cylinder delivers 628.3 N push and 527.8 N pull at 0.5 MPa, 879.6 N push at 0.7 MPa, and a maximum push of 128 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa with a proof pressure of 1.5 MPa.
The cushioning is a fixed NBR elastomer bumper at each end, not a field-adjustable air cushion, so for high-speed impacts you should add an external shock absorber. Additionally, it does not hold a load if air is lost; the rod drifts, requiring an external rod lock for fail-safe positioning.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.