
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X100ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 100mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X100ST is a double-acting JIS compact cylinder engineered for space-constrained pneumatics. Its C-clip and riveted piston-to-rod assembly drastically reduce axial depth compared to round-body units, yielding a 628.3 N push and 527.8 N pull at 0.5 MPa. The 40 mm bore uses a 16 mm piston rod and a NPT1/8 supply port, making it highly effective for mid-force machinery.
This 100 mm stroke variant represents the maximum standard extension for this bore, pushing the limits of the short-body profile. Deceleration relies on a fixed NBR elastomer bumper at each end rather than an adjustable air cushion, absorbing shock at the stroke terminus. Equipped with the -S option, it includes a piston magnet for position sensing via AirTAC reed or electronic switches mounted in the body grooves. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X100ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides 879.6 N of extend force at 0.7 MPa to secure machining pallets onto a 4th-axis rotary table before cutting operations begin.
Drives a 100 mm stroke folding arm on a continuous motion case sealer, using the compact body to fit within tight conveyor side-frame clearances.
Pushes small plastic parts out of an injection mold cavity, utilizing the integrated magnet to trigger a solid-state switch for part-released confirmation.
When sizing this 40 mm bore, compare its 628.3 N push at 0.5 MPa against the 50 mm bore (981.8 N) for higher force, or step down to the 32 mm bore (402.1 N) for a lighter duty cycle. The 100 mm stroke is the longest standard option here; longer movements up to 300 mm require the made-to-order long-stroke variant. Remember that a standard ACQ cylinder will drift and drop its load if air pressure is lost or the control valve is centered, as the fixed bumper only cushions the end stop rather than locking the rod. To order, confirm the 40 mm bore, 100 mm stroke, NPT1/8 port, female M8x1.25 rod thread, and the -S magnet option.
Quick checklist
The ACQ40X100ST generates a push force of 628.3 N and a pull force of 527.8 N at 0.5 MPa, a push of 879.6 N at 0.7 MPa, and a maximum push of 128 kgf at 1.0 MPa. The 100 mm stroke is the maximum standard stroke available for a 40 mm bore.
No, the ACQ40X100ST uses a fixed NBR elastomer bumper at each end to absorb end-stop impact. It is not an adjustable air cushion. For high-speed or high-energy loads, you should slow the approach speed or install an external shock absorber.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.