
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X100T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 100mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X100T is a double-acting JIS compact cylinder engineered for space-constrained pneumatics, delivering a robust 628.3 N push and 527.8 N pull at 0.5 MPa. Its short C-clip and riveted piston-to-rod architecture significantly reduces overall axial length compared to conventional round-body units, making it highly effective for tightening machine footprints. At its maximum standard stroke of 100 mm, this 40 mm bore unit relies on a fixed NBR elastomer bumper at each end to absorb end-stop energy.
This specific configuration features a 16 mm piston rod with a female M8x1.25 thread end and a NPT1/8 port. While the body includes integrated magnetic-switch grooves, this model ships without a sensor magnet. It operates reliably at speeds between 30-500 mm/s, and buyers should note the fixed bumper is not an adjustable air cushion, requiring external shock absorbers for high-energy cycling. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X100T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives diverting arms on medium-duty packaging conveyors, utilizing the full 100 mm stroke to push cartons cleanly onto adjacent routing lanes.
Acts as a compact secondary ejector in plastic injection molding cells, saving axial depth while providing 628.3 N of extension force to free parts from tooling.
Secures workpiece fixtures inside CNC machining centers, where the short C-clip body minimizes interference and the female M8x1.25 rod end couples directly to the clamp mechanism.
Selecting the ACQ40X100T provides a maximum standard stroke of 100 mm with a top push force of 879.6 N at 0.7 MPa. If you need slightly less power, the next bore down is the 32 mm series, offering 402.1 N push at 0.5 MPa. Stepping up to the 50 mm bore yields 981.8 N push at 0.5 MPa for heavier loads. Keep in mind that a standard compact cylinder drifts when air pressure is lost or the valve is centered; the fixed NBR bumper only decelerates the rod near the stroke end and will not lock the load, so an external rod lock or pilot-operated check valve is required for fail-safe holding.
When ordering, verify this exact configuration: 40 mm bore, 100 mm stroke, NPT1/8 port, female M8x1.25 rod thread, and no sensor magnet. You can specify the -S option if your application requires position detection via AirTAC reed or electronic switches.
Quick checklist
The ACQ40X100T generates 628.3 N push and 527.8 N pull at 0.5 MPa, increasing to 879.6 N push at 0.7 MPa, with a maximum push capacity of 128 kgf at 1.0 MPa. It operates within a pressure range of 0.15-1.0 MPa, handles temperatures from -20 to +70 C, and cycles at speeds of 30-500 mm/s.
No, the ACQ40X100T uses fixed NBR elastomer bumpers at both stroke ends rather than adjustable air cushions. For high-speed or high-energy loads, you should slow the approach speed or install an external shock absorber to prevent premature wear.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.