
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X10BLBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 10mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X10BLBT is a double-acting JIS compact cylinder engineered for minimal axial footprint installations. A C-clip and riveted piston-to-rod joint drastically reduce overall length compared to round-body alternatives, yielding 628.3 N of push force and 527.8 N of pull force at 0.5 MPa. The hard-anodized 40 mm bore ensures smooth cycling across its 10 mm stroke.
This specific configuration incorporates a male M14x1.5 threaded piston rod end for direct load coupling, alongside an LB mounting bracket interface. Instead of an adjustable air cushion, the ends feature fixed NBR elastomer bumpers to absorb impact. Machined sensor grooves encircle the body, though this unit ships without the internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X10BLBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Executes a short 10 mm knockout stroke to eject plastic parts from an injection molding die, utilizing the 628.3 N extend force to overcome mold release resistance.
Actuates a short-stroke routing flap on a packaging conveyor, where the compact C-clip body saves depth and the LB bracket provides a stable pivot mount.
Drives a short locking pin for a CNC machining center safety door, using the male M14x1.5 rod to thread directly into the locking mechanism.
When sizing this 40 mm bore unit, stepping down to a 32 mm bore yields 402.1 N of push at 0.5 MPa, while stepping up to a 50 mm bore provides 981.8 N. To finalize your order, confirm the 10 mm stroke, NPT1/8 port, LB bracket, and the male M14x1.5 rod thread. Note that a standard ACQ body will drift and cannot hold a load if air pressure drops or the valve centers; the fixed NBR bumper only decelerates the piston near the stroke limits. For fail-safe positioning, integrate an external rod lock or pilot-operated check valve.
Quick checklist
At 0.5 MPa, the push force is 628.3 N and the pull force is 527.8 N. At 0.7 MPa, the push force is 879.6 N. The maximum push force is 128 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa, proof pressure is 1.5 MPa, and the speed range is 30-500 mm/s.
It uses fixed NBR elastomer bumpers at both ends to absorb the end stop; it is not an adjustable air cushion. For high energy cycles, slow the approach or use an external shock absorber. The cylinder does not hold its position if air is lost; the rod will drift, requiring an external rod lock for fail-safe holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.