verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC ACQ Series · JIS Compact Cylinder

Airtac ACQ Ultra Thin Air Cylinder ACQ40X10BT

The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X10BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 10mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.

  • BoreØ40 mm
  • Stroke10 mm
  • Port sizePT1/8
  • Acting typeDouble acting
  • Rod threadM8×1.25 (F) / M14×1.5 (B)
  • ConfigurationStandard compact
$35.37 $42.87Save 17% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every ACQ40 stroke, mounting and version on one page All ACQ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac ACQ Ultra Thin Air Cylinder ACQ40X10BT

The AirTAC ACQ40X10BT is a double-acting JIS compact cylinder engineered for tight axial spaces, utilizing a C-clip and riveted piston-to-rod construction to drastically reduce overall length compared to round-body alternatives. Operating at 0.5 MPa, it generates 628.3 N of push force and 527.8 N of pull force, making it well-suited for robust short-stroke actuation.

This specific configuration includes a male M14x1.5 threaded piston rod end for direct mechanical coupling to your load. The 40 mm bore features a hard-anodized inner wall and relies on a fixed NBR elastomer bumper at each end to absorb end-stop energy rather than an adjustable air cushion. While it lacks a built-in sensor magnet, the body retains peripheral grooves for adding standard AirTAC position switches if needed later. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac ACQ Ultra Thin Air Cylinder ACQ40X10BT Technical Specifications

ModelAirtac ACQ Ultra Thin Air Cylinder ACQ40X10BT
SeriesACQ JIS compact (thin) cylinder
Bore sizeØ40 mm
Stroke10 mm
Acting typeDouble acting
Port sizePT1/8
Rod end threadM8×1.25 female / M14×1.5 male (B)
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionBumper (both ends)
Max standard strokeUp to 100 mm

Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa628 N528 N
0.7 MPa880 N—
Max (@1.0 MPa)128 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac ACQ Ultra Thin Air Cylinder ACQ40X10BT

ACQJIS compact (thin) double-acting cylinder series.
40Bore size in mm.
×10Stroke length in mm.
SBuilt-in magnet for magnetic-switch position sensing (omit = no magnet).
BMale-thread piston rod (omit = female-thread rod).

Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).

Where the Airtac ACQ Ultra Thin Air Cylinder ACQ40X10BT Is Used

precision_manufacturing

Stamping Pin Ejection

Provides 628.3 N of rapid extend force to eject stamped metal pins from a die plate, utilizing the short 10 mm stroke and male M14x1.5 rod to push a custom ejector blade.

conveyor_belt

Package Lane Diverting

Actuates a routing flap on a packaging conveyor to sort small cartons, where the compact C-clip body minimizes protrusion into the tight transfer zone between adjacent belts.

factory

Welding Fixture Clamping

Holds a steel bracket in a robotic welding cell, relying on the fixed NBR bumper to withstand the 879.6 N peak force at 0.7 MPa without requiring external shock absorbers.

Is the Airtac ACQ Ultra Thin Air Cylinder ACQ40X10BT the Right Cylinder?

Selecting this 40 mm bore model makes sense when your application requires approximately 628.3 N of thrust at 0.5 MPa. If you need slightly less force, the adjacent 32 mm bore provides 402.1 N of push, while stepping up to the 50 mm bore yields 981.8 N. Keep in mind that a standard double-acting cylinder like this will drift and lose its position if air pressure drops or the valve is centered; the fixed NBR bumper only decelerates the piston near the stroke end and does not function as a locking brake. For fail-safe load holding, consider integrating an external rod lock or a pilot-operated check valve.

When submitting your RFQ, verify this exact configuration: a 40 mm bore, 10 mm stroke, NPT1/8 port, male M14x1.5 rod thread (B option), and no sensor magnet. Operating speed ranges from 30-500 mm/s within a 0.15-1.0 MPa pressure envelope.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Short-body depth vs. a round-body cylinder
  • ✓ Port/thread type (PT / G / NPT)
  • ✓ Magnet (S) for sensors?
  • ✓ Female (blank) or male (B) rod thread
  • ✓ Side load — avoid on a compact rod
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the short piston rod.
  • check Very long strokes are unsuitable for the compact body.
  • check Handle the C-clip carefully; seat it fully in its groove.
  • check Installation by qualified personnel per AirTAC docs.

Airtac ACQ Ultra Thin Air Cylinder ACQ40X10BT FAQ

At 0.5 MPa, the push force is 628.3 N and the pull force is 527.8 N. At 0.7 MPa, the push force reaches 879.6 N, with a maximum push capacity of 128 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa, proof pressure is 1.5 MPa, and the operating speed is 30-500 mm/s.

No, it uses a fixed NBR elastomer bumper at each end to absorb end-stop impact, which is not field-adjustable like an air cushion. Additionally, the 'B' option indicates it has a male M14x1.5 threaded piston rod end rather than a female thread, allowing direct mounting of fixtures to the rod.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC ACQ Compact Cylinders

Request a Quote for Airtac ACQ Ultra Thin Air Cylinder ACQ40X10BT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for ACQ40X10BT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.