
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X10SBCBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 10mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X10SBCBT is a double-acting JIS compact cylinder engineered for tight axial spaces. Its short C-clip and riveted body design drastically reduces mounting depth compared to traditional round-body units. At 40mm bore, it generates 628.3 N of push force and 527.8 N of pull force at 0.5 MPa, making it well-suited for medium-duty positioning tasks.
This specific configuration includes a built-in piston magnet (-S) for direct compatibility with AirTAC reed or electronic switches via the body's peripheral grooves. It features a male M14x1.5 threaded rod end (-B) for secure load coupling, a CB mounting bracket interface, and a NPT1/8 port. End-of-stroke energy is managed by a fixed NBR elastomer bumper, which is not field-adjustable. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X10SBCBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides 628.3 N of extension force at 0.5 MPa to secure aluminum engine blocks during CNC milling operations.
Utilizes the short 10mm stroke and male M14x1.5 rod end to drive sealing jaws on a continuous flow wrapper.
Actuates a routing flap on a logistics conveyor line, using the integrated magnet for electronic position sensing.
When sizing this 40mm bore model, consider stepping down to the 32mm bore if your application only requires 402.1 N of push force at 0.5 MPa, or stepping up to the 50mm bore for a substantial increase to 981.8 N. This ACQ40X10SBCBT configuration specifies a 10mm stroke, a NPT1/8 port, the male M14x1.5 rod thread, and the sensor magnet.
Remember that a standard compact cylinder cannot maintain its position or hold a load if air pressure drops or the directional valve is centered; the rod will drift. If your process demands fail-safe load holding, you must integrate an external rod lock or a pilot-operated check valve into the pneumatic circuit.
Quick checklist
This 40mm bore double-acting cylinder provides 628.3 N push and 527.8 N pull at 0.5 MPa, 879.6 N push at 0.7 MPa, and a maximum push force of 128 kgf at 1.0 MPa. It operates at 30-500 mm/s within a pressure range of 0.15-1.0 MPa.
No, it uses a fixed NBR elastomer bumper at each end to absorb impact energy. Because it is not an adjustable cushion, you should slow the approach speed or add an external shock absorber for high-energy loads.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.