
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X10SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 10mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X10SBT is a double-acting JIS compact cylinder engineered for tight axial spaces, utilizing a C-clip and riveted piston-to-rod assembly to drastically reduce overall depth compared to round-body alternatives. Driven by filtered air through a NPT1/8 port, this 40mm bore unit generates 628.3 N of push force and 527.8 N of pull force at 0.5 MPa.
Equipped with a built-in magnet (-S), the body features integrated grooves for mounting AirTAC reed or electronic switches to track the 10mm travel. The male-thread piston rod end (-B, M14x1.5) couples directly to your tooling, while a fixed NBR elastomer bumper absorbs end-stop energy; note this is a rigid bumper, not a field-adjustable air cushion, so high-speed approaches may require external shock absorption. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X10SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides 628.3 N of clamping thrust at 0.5 MPa to secure printed circuit boards during routing, with the 10mm short stroke keeping the fixture profile minimal.
Uses the male M14x1.5 rod end to drive a compact tucking blade on a packaging line, cycling rapidly within the 30-500 mm/s operational speed band.
Ejects machined aluminum parts from a CNC chuck using a 16mm rod, relying on the NBR bumper to soften the impact at the 10mm extension limit.
When sizing this 40mm bore model, stepping down to a 32mm bore drops the 0.5 MPa push output to 402.1 N, whereas stepping up to a 50mm bore increases it to 981.8 N. This ACQ40X10SBT configuration ships with the essential ordering parameters: 40mm bore, 10mm stroke, NPT1/8 port, a built-in sensor magnet, and a male M14x1.5 rod thread.
Keep in mind that a standard compact cylinder will not hold a load if air pressure drops or the directional valve is centered; the piston will drift, and the fixed bumper only decelerates the rod near the stroke end. If your fixture requires fail-safe position holding, incorporate an external rod lock or a pilot-operated check valve into the pneumatic circuit.
Quick checklist
This 40mm bore double-acting cylinder outputs 628.3 N push and 527.8 N pull at 0.5 MPa, 879.6 N push at 0.7 MPa, and reaches a maximum push of 128 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa.
It uses a fixed NBR elastomer bumper at each end to absorb shock, which is not an adjustable air cushion. The -S code indicates a built-in piston magnet designed to trigger AirTAC reed or electronic switches housed in the body grooves.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.