
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X10T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 10mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X10T is a double-acting JIS compact air cylinder engineered for tight axial spaces. It yields 628.3 N of push force and 527.8 N of pull force at 0.5 MPa, driven by a 40 mm bore. The short C-clip and riveted piston-to-rod assembly drastically reduces overall length compared to standard round-body units, saving valuable machine footprint.
This specific configuration features a 10 mm stroke and a default female-thread piston rod end (M8x1.25) on a 16 mm diameter rod. The barrel is hard-anodized aluminum, and deceleration is handled by fixed NBR elastomer bumpers at each end rather than adjustable cushions. While it lacks the -S magnet option, the body retains integrated sensor grooves for future retrofits. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X10T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides 628.3 N of extend force to secure aluminum workpieces against a CNC machining center tombstone during facing operations.
Drives the upper sealing mechanism on continuous motion case sealers, utilizing the 10 mm stroke for rapid, repeatable adhesive tape application.
Inserts small bronze bushings into gearbox housings on an automated assembly line, using the fixed NBR bumper to absorb the final seating impact.
When sizing this 40 mm bore actuator, consider stepping down to a 32 mm bore (402.1 N push @0.5 MPa) for lighter duties, or up to a 50 mm bore (981.8 N push @0.5 MPa) if your load requires more thrust. To order this exact unit, confirm the 40 mm bore, 10 mm stroke, NPT1/8 port, female rod thread, and no magnet. Note that a plain ACQ cylinder will drift and cannot hold a load if air pressure drops; for fail-safe positioning, incorporate an external rod lock or pilot-operated check valve.
Quick checklist
The ACQ40X10T generates 628.3 N push and 527.8 N pull at 0.5 MPa, 879.6 N push at 0.7 MPa, and a maximum push of 128 kgf at 1.0 MPa. It operates on filtered air at 0.15-1.0 MPa, runs at 30-500 mm/s, and functions in -20 to +70 C temperatures.
No, it uses fixed NBR elastomer bumpers at the stroke ends, which are not field-adjustable; for high kinetic energy, slow the approach or add an external shock absorber. Additionally, it does not hold its load if air is lost—the rod drifts, requiring an external rod lock for fail-safe holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.