
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X15BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 15mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X15BT is a double-acting JIS compact cylinder engineered for tight axial spaces, utilizing a C-clip and riveted piston-to-rod assembly to minimize overall length. Operating at 0.5 MPa, it generates 628.3 N of push force and 527.8 N of pull force. This 40 mm bore, 15 mm stroke model features a NPT1/8 port and a hard-anodized aluminum inner wall for extended service life.
Equipped with a male M14x1.5 piston rod thread (denoted by the B option), it couples directly to tooling without requiring extra adapters. The unit relies on a fixed NBR elastomer bumper at each end to absorb end-of-stroke impacts rather than an adjustable air cushion. While the body includes grooves for magnetic switches, this specific configuration ships without a sensor magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X15BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Secures aluminum engine blocks during CNC machining, utilizing the 628.3 N extend force to lock parts firmly against locating pins.
Drives the mechanical arms that tuck and fold corrugated cardboard flaps on high-speed packaging lines prior to sealing.
Actuates routing gates on modular conveyor systems to redirect heavy industrial pallets into specific sorting lanes.
When sizing this 40 mm bore actuator, consider stepping down to the Ø32 version which provides 402.1 N of push force at 0.5 MPa, or moving up to the Ø50 variant which yields 981.8 N if your application demands greater thrust. Keep in mind that a standard ACQ body does not hold its position if air pressure drops or the valve is centered; the piston will drift and the fixed bumper only decelerates it near the stroke end. For fail-safe load holding, an external rod lock or pilot-operated check valve is required.
To finalize your order, verify the 40 mm bore, 15 mm stroke, NPT1/8 port thread, and the male M14x1.5 rod end. Because this unit lacks the S option, it does not include a magnet for reed or electronic switches.
Quick checklist
At 0.5 MPa, the push force is 628.3 N and the pull force is 527.8 N. At 0.7 MPa, the push force increases to 879.6 N. The maximum push force is 128 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa, with a speed range of 30-500 mm/s.
No, it uses a fixed NBR elastomer bumper at each end to absorb end stops, which is not a field-adjustable air cushion. Additionally, while the body has grooves for magnetic switches, this specific model does not ship with the internal magnet required for them.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.