
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X15SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 15mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X15SBT is a double-acting JIS compact cylinder engineered for minimal axial footprint machines. Its C-clip and riveted piston-to-rod assembly drastically reduce overall length compared to round-body alternatives, yielding 628.3 N of push force at 0.5 MPa. Driven by a 16 mm piston rod, this specific unit includes a male M14x1.5 thread end for direct mechanical coupling.
Equipped with a built-in piston magnet (-S), the body accepts AirTAC reed or electronic solid-state switches along its peripheral slots. Deceleration at the 15 mm travel limits relies on a fixed NBR elastomer bumper rather than an adjustable air cushion. Because it lacks a pneumatic cushion valve, high-energy cycles might require an external shock absorber to soften the end-stop impact. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X15SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the 628.3 N extension force needed to snap corrugated cardboard flaps into position on high-speed packaging lines within a tight machine envelope.
Uses the 15 mm stroke to nudge small parcels onto a secondary conveyor belt, with the male M14x1.5 rod threading directly into the diverter arm.
Secures thin printed circuit board panels against a machining deck, benefiting from the short C-clip body depth to maximize routing spindle clearance.
When sizing this 40 mm bore, stepping down to an ACQ32 variant provides 402.1 N of push at 0.5 MPa, while moving up to an ACQ50 bore increases that thrust to 981.8 N. Be aware that a standard ACQ body will drift and cannot hold a vertical load if air pressure drops or the valve centers; maintaining position requires an external rod lock or pilot-operated check valve. To order this exact unit, confirm the 40 mm bore, 15 mm stroke, NPT1/8 port, S magnet, and male B rod thread.
Quick checklist
This 40 mm bore cylinder generates 628.3 N of push force and 527.8 N of pull force at 0.5 MPa. At 0.7 MPa, the push force is 879.6 N, and its maximum push force is 128 kgf at 1.0 MPa.
It uses a fixed NBR elastomer bumper at each end to absorb the stop, which is not an adjustable air cushion. Additionally, it does not hold its load when air is lost or the valve is centered; the piston will drift, requiring an external rod lock for fail-safe positioning.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.