
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X15ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 15mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X15ST is a double-acting JIS compact cylinder engineered for space-constrained pneumatics. It delivers a robust 628.3 N push and 527.8 N pull force at 0.5 MPa, extending to 879.6 N push at 0.7 MPa. The riveted C-clip assembly significantly reduces axial depth compared to conventional round-body units, making it highly effective for tightening machine footprints.
This specific configuration includes a built-in piston magnet (-S) for position tracking via AirTAC reed or electronic switches seated in the body grooves. End-of-travel deceleration relies on a fixed NBR elastomer bumper rather than an adjustable air cushion, meaning high-speed operations may require external shock absorption. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X15ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides 628.3 N of clamping force at 0.5 MPa to secure aluminum workpieces inside CNC milling fixtures, where the short 15 mm stroke minimizes interference with the spindle.
Actuates a routing flap on a high-speed logistics conveyor, using the built-in magnet to trigger electronic switches for precise timing during parcel sorting.
Drives a compact sealing head down onto corrugated cartons, relying on the fixed NBR bumper to absorb the impact of the 15 mm stroke without requiring external adjustment.
When sizing this 40 mm bore unit, consider stepping down to the 32 mm bore for 402.1 N of push at 0.5 MPa if your load is lighter, or moving up to the 50 mm bore for 981.8 N when heavier force is required. This 15 mm stroke model is well within the 100 mm standard stroke limit for this bore size.
Keep in mind that a standard ACQ body will not hold a load if air pressure drops or the directional valve centers; the rod drifts, and the fixed NBR bumper only softens the end stop. For fail-safe vertical holding, integrate an external rod lock or a pilot-operated check valve. To order, confirm the 40 mm bore, 15 mm stroke, NPT1/8 port, female M8x1.25 rod thread, and the required -S magnet.
Quick checklist
This double-acting cylinder generates 628.3 N push and 527.8 N pull at 0.5 MPa, 879.6 N push at 0.7 MPa, and a maximum push of 128 kgf at 1.0 MPa. It operates at speeds of 30-500 mm/s.
No, the ACQ40X15ST uses a fixed NBR elastomer bumper at each end, not an adjustable air cushion. For high kinetic energy loads, you should slow the approach speed or add an external shock absorber.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.