
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X15T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 15mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X15T is a double-acting JIS compact air cylinder engineered for space-constrained setups. It produces 628.3 N of push force and 527.8 N of pull force at 0.5 MPa, utilizing a 16 mm piston rod to transfer motion efficiently. Its integrated C-clip and riveted piston-to-rod assembly drastically reduce overall length compared to conventional round-body units, saving valuable axial mounting depth.
This 40 mm bore variant features a NPT1/8 port and a female M8x1.25 rod-end thread for straightforward load coupling. Deceleration is handled by a fixed NBR elastomer bumper at each end rather than an adjustable air cushion, meaning high-speed operations might require an external shock absorber to soften the end-stop impact. The body includes standard magnetic-switch grooves, though this specific configuration ships without the internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X15T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the 628.3 N push force required to fold heavy corrugated cardboard flaps on continuous packaging lines, fitting neatly within tight conveyor side-frame clearances.
Ejects small plastic parts from injection molding tools, where the short 15 mm stroke and compact C-clip body minimize interference with the mold base.
Secures aluminum workpieces in machining vises, using its 527.8 N pull force to hold components firmly against locators during light milling operations.
When sizing your pneumatic drive, compare this 40 mm bore against adjacent options: stepping down to a 32 mm bore yields 402.1 N of push at 0.5 MPa, while stepping up to a 50 mm bore provides 981.8 N. The ACQ40X15T is ideal for applications needing roughly 64 kgf of peak thrust within a tight footprint. Remember that a standard compact cylinder drifts when air pressure is lost or the valve is centered, as the fixed bumper only decelerates the rod near stroke end rather than locking it. To maintain vertical loads safely, integrate an external rod lock or pilot-operated check valve. To order, confirm the 40 mm bore, 15 mm stroke, NPT1/8 port, female M8x1.25 rod thread, and no magnet.
Quick checklist
At 0.5 MPa, the ACQ40X15T delivers 628.3 N of push force and 527.8 N of pull force. At 0.7 MPa, the push force increases to 879.6 N. The maximum push force is 128 kgf at 1.0 MPa. Operating pressure ranges from 0.15-1.0 MPa, with a proof pressure of 1.5 MPa and a speed range of 30-500 mm/s.
It uses a fixed NBR elastomer bumper at each end to absorb shock, which is not an adjustable air cushion. For high-energy cycles, you should slow the approach or add an external shock absorber. Additionally, the bumper only decelerates the piston; it does not lock the rod, so an external rod lock is required to hold loads without live air pressure.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.