
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X20BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 20mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X20BT is a double-acting JIS compact cylinder engineered with a short C-clip and riveted body to minimize axial mounting depth. This thin profile easily fits where round-body actuators are too long, saving valuable machine footprint. It provides a robust 628.3 N push force and 527.8 N pull force at 0.5 MPa.
This specific configuration features a male M14x1.5 thread on the Ø16 mm piston rod for direct load coupling. The hard-anodized aluminum bore uses a fixed NBR elastomer bumper at each end to absorb end-stop impact. It is important to note this unit ships without a sensor magnet, though the body retains magnetic-switch grooves for future retrofitting. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X20BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 20 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides 628.3 N of extend force to secure aluminum extrusion profiles against a CNC machining bed before high-speed milling operations.
Drives a short 20 mm stroke folding arm on an automated packaging line to tuck corrugated cardboard flaps prior to case sealing.
Shifts a lightweight routing gate on a conveyor system to direct wooden pallets into a secondary packaging lane using its 527.8 N pull force.
When sizing this 40 mm bore actuator, compare its 628.3 N push at 0.5 MPa against the next size down (32 mm bore yielding 402.1 N) or the next size up (50 mm bore yielding 981.8 N) to match your exact load requirements. To order, confirm the 40 mm bore, 20 mm stroke, NPT1/8 port, and the male M14x1.5 rod thread. Because this is a double-acting cylinder, the piston will drift and fail to hold its position if air pressure is lost or the valve is centered. For fail-safe load holding, an external rod lock or pilot-operated check valve is required.
Quick checklist
This 40 mm bore double-acting cylinder provides a push force of 628.3 N and a pull force of 527.8 N at 0.5 MPa. At 0.7 MPa, the push force is 879.6 N. The maximum push force is 128 kgf at 1.0 MPa.
No, it uses a fixed NBR elastomer bumper at each end to decelerate the piston near the stroke limits. It is not a field-adjustable air cushion or a locking brake. For high-energy cycles, you should add an external shock absorber or slow the approach speed.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.