
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X20CBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 20mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X20CBT is a double-acting JIS compact cylinder engineered for space-constrained pneumatic setups. Its short C-clip and riveted body design drastically reduces overall axial length compared to round-body alternatives, saving valuable mounting depth. Delivering 628.3 N of push force at 0.5 MPa, it is built around a hard-anodized aluminum bore and a 16 mm piston rod.
This specific configuration features a 20 mm stroke and ships with a CB mounting bracket for secure attachment. The rod end utilizes a female M8x1.25 thread for direct load coupling. Deceleration is handled by fixed NBR elastomer bumpers at each end, which are not field-adjustable. The body includes sensor grooves, though this unit omits the internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X20CBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 20 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides 628.3 N of extension force at 0.5 MPa to secure aluminum workpieces against a CNC machining center tombstone during face milling operations.
Uses the 20 mm stroke and CB bracket to actuate a short pivot arm, pushing corrugated cardboard cartons from a main logistics conveyor belt onto a sorting lane.
Drives a 16 mm rod to press small bronze bushings into electric motor end bells, relying on the fixed NBR bumper to absorb the 128 kgf peak impact without rebound.
When sizing your pneumatics, consider stepping down to the 32 mm bore (402.1 N push at 0.5 MPa) for lighter duties, or moving up to the 50 mm bore (981.8 N push at 0.5 MPa) if you need greater thrust. To order this exact unit correctly, confirm the 40 mm bore, 20 mm stroke, NPT1/8 port, female M8x1.25 rod thread, and the CB bracket interface. Note that a plain ACQ cylinder will not hold a load if air pressure drops or the valve is centered; the rod will drift. For fail-safe positioning, integrate an external rod lock or a pilot-operated check valve into your circuit.
Quick checklist
This 40 mm bore double-acting cylinder provides 628.3 N push and 527.8 N pull at 0.5 MPa, 879.6 N push at 0.7 MPa, and a maximum push of 128 kgf at 1.0 MPa. It operates on filtered air at 0.15-1.0 MPa, handles a proof pressure of 1.5 MPa, and runs at speeds between 30-500 mm/s.
It uses a fixed NBR elastomer bumper at each end to absorb impact, which is not an adjustable air cushion. For high-energy cycles, slow the approach or add an external shock absorber. Additionally, this cylinder does not hold its position if air is lost; the rod drifts, requiring an external rod lock for fail-safe load holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.