
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X20SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 20mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X20SBT is a double-acting JIS compact cylinder engineered for space-constrained pneumatic setups, delivering a robust 628.3 N push force at 0.5 MPa. Its short C-clip and riveted body design significantly reduces axial mounting depth compared to conventional round-body units. This specific configuration includes a built-in piston magnet (-S) for position sensing and a male-thread piston rod (-B) to couple directly with your tooling.
This 40 mm bore model features a 16 mm piston rod and a NPT1/8 port. Rather than an adjustable air cushion, it relies on fixed NBR elastomer bumpers at both stroke ends to absorb impact. Because it operates at speeds up to 500 mm/s, you may need an external shock absorber for high-energy loads. The integrated magnet supports AirTAC reed or electronic switches mounted into the body grooves. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X20SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 20 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives short-stroke ejector pins in plastic injection molding machines where the male M14x1.5 rod threads directly into the ejector plate.
Folds corrugated carton flaps on high-speed packaging lines, utilizing the 628.3 N extend force to cleanly crease heavy cardboard.
Actuates diverter arms on conveyor belts to route pallets, relying on the compact body to fit within narrow transfer zones.
Selecting this 40 mm bore involves balancing your force requirements: stepping down to a 32 mm bore yields 402.1 N push at 0.5 MPa, while stepping up to a 50 mm bore provides 981.8 N. If your mechanism must hold a vertical load without live air pressure, note that a standard ACQ drifts when valves are centred—the fixed bumper only decelerates near stroke end, so an external rod lock or pilot-operated check valve is required for fail-safe holding.
Confirm your ordering essentials for the ACQ40X20SBT: 40 mm bore, 20 mm stroke, NPT1/8 port, built-in magnet (S), and male M14x1.5 rod thread (B). The standard stroke limit for this bore is 100 mm, making the 20 mm travel ideal for tight, short-throw clamping tasks.
Quick checklist
At 0.5 MPa, the push force is 628.3 N and the pull force is 527.8 N. At 0.7 MPa, the push force is 879.6 N. The maximum push force is 128 kgf at 1.0 MPa.
No, the ACQ40X20SBT uses fixed NBR elastomer bumpers at each end rather than an adjustable air cushion. For high-speed or high-energy loads, you should slow the approach speed or add an external shock absorber.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.