
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X20ST is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 20mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X20ST is a double-acting JIS compact air cylinder engineered with a 40mm bore and 20mm stroke. It delivers a robust 628.3 N push force at 0.5 MPa, utilizing a hard-anodized inner bore and a two-way piston seal for reliable linear motion. Equipped with a built-in magnet (-S), it supports position sensing via AirTAC reed or electronic switches mounted in the peripheral body grooves.
This thin-profile unit uses a C-clip and riveted piston-to-rod assembly to drastically cut axial mounting depth compared to round-body alternatives. Deceleration at stroke limits relies on a fixed NBR elastomer bumper rather than an adjustable air cushion, meaning high-energy cycles may need external shock absorption. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X20ST |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 20 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides 628.3 N of extension force at 0.5 MPa to secure aluminum housings inside CNC machining centers, saving valuable Z-axis envelope depth.
Uses the integrated -S magnet with electronic switches to trigger rapid 20mm stroke routing of cardboard cartons on high-speed logistics conveyor lines.
Handles short-stroke plastic part ejection from injection molds where the compact C-clip body minimizes interference with the press platen.
When sizing this 40mm bore, compare its 628.3 N push at 0.5 MPa against the smaller 32mm option (402.1 N) or the larger 50mm variant (981.8 N) to match your exact load requirements. Remember that a standard ACQ body will drift and lose its position if air pressure drops or the valve is centred; the fixed NBR bumper only softens the end stop and does not act as a locking brake. For fail-safe load holding, an external rod lock or pilot-operated check valve is mandatory. To order this exact unit, confirm the 40mm bore, 20mm stroke, NPT1/8 port, female M8x1.25 rod thread, and the required -S magnetic piston.
Quick checklist
The 40mm bore yields 628.3 N push and 527.8 N pull at 0.5 MPa, 879.6 N push at 0.7 MPa, and a maximum push of 128 kgf at 1.0 MPa. This order code has NPT ports (the T in the code); the PT and G versions are separate order codes.
No. End-of-stroke deceleration is handled by a fixed NBR elastomer bumper, not a field-adjustable air cushion, so you may need an external shock absorber for high-speed impacts. Additionally, the cylinder cannot hold a load if air is lost; it will drift, requiring an external rod lock for fail-safe positioning.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.