
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X25BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 25mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X25BT is a double-acting JIS compact cylinder engineered for space-constrained pneumatic setups. Utilizing a C-clip and riveted piston-to-rod assembly, the short body design significantly reduces axial mounting depth compared to round-body alternatives. At 0.5 MPa, it generates 628.3 N of push force and 527.8 N of pull force, peaking at 879.6 N push when supplied with 0.7 MPa.
This specific configuration includes a male M14x1.5 threaded piston rod end for direct load coupling. The 40 mm bore uses a NPT1/8 port and relies on a fixed NBR elastomer bumper at each end to absorb end-stop impact rather than an adjustable air cushion. The body features integrated magnetic-switch grooves, though this particular unit ships without the internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X25BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives the folding mechanism on continuous motion case packers, utilizing the 25 mm stroke to tuck carton flaps precisely during high-speed packaging runs.
Ejects thin-walled plastic parts from injection molding tools where tight machine frames restrict the use of longer, standard profile cylinders.
Pivots sorting gates on conveyor lines, using the male M14x1.5 rod end to securely link the drive rod directly to the mechanical gate arm.
When sizing this 40 mm bore actuator, consider stepping down to the 32 mm bore (402.1 N push @0.5 MPa) for lighter duties, or moving up to the 50 mm bore (981.8 N push @0.5 MPa) if your application demands greater thrust. The ACQ40X25BT travels a 25 mm stroke, operates between 30-500 mm/s, and requires a NPT1/8 air connection.
Keep in mind that a standard double-acting cylinder does not hold its position if air pressure drops or the directional valve is centered; the rod will drift. For fail-safe load holding, an external rod lock or pilot-operated check valve is required. To order, confirm the 40 mm bore, 25 mm stroke, male M14x1.5 rod thread, and the absence of a sensor magnet.
Quick checklist
This 40 mm bore cylinder provides 628.3 N push and 527.8 N pull at 0.5 MPa. At 0.7 MPa, the push force is 879.6 N. The maximum allowable push force is 128 kgf at 1.0 MPa operating pressure.
No, the ACQ40X25BT uses a fixed NBR elastomer bumper at each end to decelerate the piston near stroke end. It is not a field-adjustable air cushion. For high kinetic energy loads, you should slow the approach speed or install an external shock absorber.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.