
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X25SBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 25mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X25SBT is a double-acting JIS compact cylinder engineered for space-constrained pneumatics. It utilizes a short C-clip and riveted body design that significantly reduces axial mounting depth compared to standard round-body units. At 40mm bore, it generates 628.3 N of push force and 527.8 N of pull force at 0.5 MPa.
This specific configuration includes an integrated piston magnet (-S) for position sensing and a male-thread rod end (-B). The M14x1.5 male thread couples directly to your tooling, while the hard-anodized aluminum bore operates at speeds from 30 to 500 mm/s. End-of-stroke energy is managed by fixed NBR elastomer bumpers rather than adjustable air cushions. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X25SBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides 628.3 N of extend force at 0.5 MPa to secure aluminum workpieces inside CNC machining centers, utilizing the male M14x1.5 rod for direct tooling attachment.
Drives folding mechanisms on automated packaging lines where the short C-clip body saves axial space and the integrated magnet triggers reed or electronic switches for cycle confirmation.
Actuates routing gates on package conveyor systems, relying on the 527.8 N retract force to pull the arm clear of passing parcels at speeds up to 500 mm/s.
When sizing this 40mm bore model, stepping down to a 32mm cylinder reduces the 0.5 MPa push force to 402.1 N, whereas stepping up to a 50mm bore increases it to 981.8 N. The 40mm variant strikes a balance for mid-range actuation. Note that a standard ACQ body will drift and cannot hold a load if air pressure drops or the valve is centered; the fixed NBR bumper only decelerates the piston near stroke end. For fail-safe positioning, an external rod lock or pilot-operated check valve is required.
To order, confirm the 40mm bore, 25mm stroke, NPT1/8 port, built-in magnet (S), and male M14x1.5 piston rod (B). The maximum standard stroke available for this bore size is 100 mm.
Quick checklist
The 40mm bore generates a push force of 628.3 N and a pull force of 527.8 N at 0.5 MPa. At 0.7 MPa, the push force is 879.6 N. The maximum push force is 128 kgf at 1.0 MPa. The maximum standard stroke available for this bore is 100 mm.
No, it uses fixed NBR elastomer bumpers at both ends rather than field-adjustable air cushions; for high kinetic energy loads, slow the approach or add an external shock absorber. It also features a male M14x1.5 threaded rod end (the -B option) instead of a female thread.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.