
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X25T is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 25mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X25T is a double-acting JIS compact cylinder engineered to deliver 628.3 N of push force at 0.5 MPa and 879.6 N at 0.7 MPa. Its short C-clip and riveted piston-to-rod architecture significantly reduce overall axial length compared to round-body alternatives, saving valuable mounting depth within tight machinery footprints.
This 40 mm bore unit features a 16 mm piston rod, a NPT1/8 port, and a female M8x1.25 rod-end thread for secure load coupling. Deceleration is handled by fixed NBR elastomer bumpers at each end rather than adjustable air cushions, meaning high-energy cycles may require external shock absorption. The body includes sensor grooves, though this specific SKU ships without the internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X25T |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides 628.3 N of extend force at 0.5 MPa to eject plastic parts from small injection mold tools where axial mounting space is highly restricted.
Drives a 25 mm stroke diverter mechanism on a packaging line, utilizing the short JIS compact body to fit neatly between conveyor belt sections.
Actuates a safety door latch on a CNC lathe, benefiting from the fixed NBR bumper to soften the 25 mm end-of-travel stop without needing external cushioning adjustments.
When sizing this 40 mm bore actuator, compare its 628.3 N push at 0.5 MPa against the smaller 32 mm bore offering 402.1 N, or step up to the 50 mm bore providing 981.8 N for heavier thrust requirements. Remember that a standard ACQ body will not hold a suspended load if air pressure drops or the directional valve is centered, as the rod drifts and the NBR bumper only decelerates near stroke end; a fail-safe setup requires an external rod lock or pilot-operated check valve. To order this exact unit, confirm the 40 mm bore, 25 mm stroke, NPT1/8 port, female M8x1.25 rod thread, and no magnet.
Quick checklist
The 40 mm bore double-acting rod provides 628.3 N push and 527.8 N pull at 0.5 MPa, 879.6 N push at 0.7 MPa, and a maximum push of 128 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa with a speed range of 30-500 mm/s.
No, it uses fixed NBR elastomer bumpers at the stroke ends for deceleration, which are not field-adjustable; high-speed applications may need external shock absorbers. Additionally, it has no locking mechanism, so an external rod lock is required to hold a load safely without live air pressure.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.