
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X30BT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 30mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X30BT is a double-acting JIS compact cylinder engineered for space-constrained pneumatics. Its short C-clip and riveted body design significantly reduces axial mounting depth compared to round-body alternatives, yielding a 628.3 N push force at 0.5 MPa. The unit features a 16 mm piston rod and a NPT1/8 port.
This specific configuration includes the B option, providing a male M14x1.5 threaded rod end for direct load coupling. Deceleration relies on a fixed NBR elastomer bumper at each end rather than an adjustable air cushion, so high-energy cycles may require external shock absorption. The body retains magnetic switch grooves, though this unit ships without the internal magnet. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X30BT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides the 628.3 N push force required to fold and secure corrugated cardboard flaps on high-speed packaging lines.
Uses its 16 mm male-threaded rod to eject small stamped metal parts from a die, fitting within tight machine footprint limits.
Actuates a routing flap on a conveyor system to sort heavy wooden pallets, benefiting from the short overall body length.
When sizing this 40 mm bore actuator, consider stepping down to the 32 mm bore for 402.1 N push at 0.5 MPa, or up to the 50 mm bore for 981.8 N push at 0.5 MPa. Remember that a standard ACQ body does not hold its position if air pressure drops or the valve centers; the rod will drift and the fixed bumper only slows it near stroke end. For fail-safe load holding, an external rod lock or pilot-operated check valve is required. To order, confirm the 40 mm bore, 30 mm stroke, NPT1/8 port, male M14x1.5 rod thread, and no magnet.
Quick checklist
This 40 mm bore cylinder provides 628.3 N push and 527.8 N pull at 0.5 MPa, 879.6 N push at 0.7 MPa, and a maximum push of 128 kgf at 1.0 MPa. The maximum standard stroke available for this bore is 100 mm.
No, the ACQ40X30BT uses a fixed NBR elastomer bumper at each end to absorb the impact, not a field-adjustable air cushion. For high-speed or high-energy loads, you should slow the approach speed or add an external shock absorber.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.