
The AirTAC ACQ Ultra Thin Air Cylinder ACQ40X30SBLBT is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø40mm bore and 30mm stroke, PT1/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ40X30SBLBT is a double-acting JIS compact cylinder engineered to deliver a robust 628.3 N push force at 0.5 MPa. Its short C-clip and riveted body construction drastically reduce axial mounting depth compared to standard round-body units, making it ideal for tight machine footprints. This specific configuration includes an LB mounting bracket for rigid lateral attachment.
Equipped with a built-in piston magnet (S) and a male M14x1.5 threaded rod end (B), it couples directly to your load and supports AirTAC reed or electronic switches via the integrated sensor grooves. End-of-stroke energy is managed by a fixed NBR elastomer bumper rather than an adjustable air cushion, meaning high-speed applications may require external shock absorption. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ40X30SBLBT |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø40 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 528 N |
| 0.7 MPa | 880 N | — |
| Max (@1.0 MPa) | 128 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides 628.3 N of extend force to secure aluminum engine blocks in CNC machining centers, utilizing the male M14x1.5 rod for direct tooling attachment.
Actuates routing gates on logistics conveyor lines where the LB bracket ensures rigid mounting against lateral deflection during high-speed cart sorting.
Drives the sealing head down on automated packaging equipment, saving axial depth while the NBR fixed bumper absorbs the 30 mm stroke end impact.
When sizing this 40 mm bore actuator, consider stepping down to the 32 mm bore for 402.1 N push, or up to the 50 mm bore for 981.8 N push at 0.5 MPa. Remember that a plain compact cylinder does not hold its position if air pressure drops or the valve is centered; the rod will drift, and the fixed bumper only decelerates it near the stroke end. For fail-safe load holding, an external rod lock or pilot-operated check valve is required.
For ordering, this ACQ40X30SBLBT specifies a 40 mm bore, 30 mm stroke, NPT1/8 port, built-in magnet (S), male M14x1.5 rod thread (B), and an LB mounting bracket. The 16 mm piston rod handles up to a 100 mm standard stroke, with long-stroke variants available up to 300 mm.
Quick checklist
At 0.5 MPa, this 40 mm bore double-acting cylinder provides 628.3 N of push force and 527.8 N of pull force. At 0.7 MPa, the push force is 879.6 N, with a maximum push capacity of 128 kgf at 1.0 MPa. It operates between 0.15-1.0 MPa, handles speeds of 30-500 mm/s, and functions in temperatures from -20 to +70 C.
It uses a fixed NBR elastomer bumper at each end to absorb shock, which is not an adjustable air cushion or a locking brake. If your application involves high kinetic energy, you should slow the approach speed or add an external shock absorber. Furthermore, it will not hold a load if air is lost; an external rod lock is needed for fail-safe holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.